Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Blown up RXT

  1. #1

    Join Date
    Jul 2005
    Location
    Spencer, MA
    Posts
    4

    Blown up RXT

    I had just installed a RR SC impeller and BOV and clutch kit. Ran awesome for about 2 hours then the check engine light came on and it didn't want to start. Checked compression and # 3 and 2 had 0 psi and # 1 had 50 psi. Has any one been able to get theres warrented with aftermarkets still on or am i gonna have to put everything back on before i bring it in for a new motor.

    Man i hate when weekends get cut short


  2. #2
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,466
    +1
    3
    0 psi in 2 cylinders? it even cranking? what the heck is goin on

  3. #3

    Join Date
    Jul 2005
    Location
    Spencer, MA
    Posts
    4
    Ya tell me about it it cranks over, but very slow it's odd that it went only 2 hours after installing the RR SC impeller and bov i made sure everything was clean and i know that other people have done the stage one kit with the impeller and bov went great then died i can only hope that they will warranty it

  4. #4
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    9,371
    +1
    623
    For just the motor alone you are looking at $4000 G's.

    Don't even give them a reason not to warranty it. Place all of it back to stock and take it in. With that big of a $$$ fix they might just say NO with those parts installed, so why take the chance.

    JMO, Water4fire

  5. #5
    How do you check compression ?

  6. #6
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    34,980
    +1
    1,898
    Put it to stock and bring it to the dealer.

    Kinchyle, you use a compression gauge to check compression.

  7. #7

  8. #8
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    34,980
    +1
    1,898
    Yep, just like that.

  9. #9

    Join Date
    Jul 2005
    Location
    Spencer, MA
    Posts
    4
    my day off today so im gonna take some time and put everything back to stock and bring it back up to the dealer. i know that the motors are $4500 from sea doo so i mine as well not chance it with the parts.

  10. #10

    Join Date
    May 2005
    Location
    so cal
    Posts
    265
    if you see aluminum in the sc housing, I would clean it up as good as possible. either that or a complete oil pump failure is the only way I can see ruining all 3 cylinders.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RXT-X rods blown straight through bottom of motor
    By 98supra6spd in forum Sea Doo Open Discussion
    Replies: 56
    Last Post: 06-01-2010, 10:32 PM
  2. Removed blown Super Charger from RXT: Suggestions? *PICS*
    By ktyamaha36 in forum Sea Doo Open Discussion
    Replies: 15
    Last Post: 04-29-2010, 09:05 AM
  3. Buying 05 RXT with Blown Supercharger. Need Advice!
    By ktyamaha36 in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 04-28-2010, 05:32 PM
  4. FS 05 RXT with blown motor (sucked SC washer!!)
    By developerjj in forum Sea Doo 4Tec Skis
    Replies: 19
    Last Post: 12-21-2009, 09:52 PM
  5. rxt-x blown supercharger
    By jordan572 in forum 4-Tec Performance
    Replies: 18
    Last Post: 08-10-2009, 06:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •