Results 1 to 6 of 6
  1. #1

    intake grate on '94 waveraider

    Hi guys i have a slightly modded waveraider and i am looking to get a intake grate and ride plate. Will these two things add a noticeable performance differnce? any recommendations for brands? if i do intake grate should i also do impeller? thanks let me know what you think.


  2. #2
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,155
    +1
    170
    Cut stock center bars out of your stock one. I also have a Riva CDI that fits your ski on Ebay right now that has hotter spark, advance timing and adjustable rev limiter. It will give more bottom/mid power out of your 701.

    M

  3. #3

    cutting bars

    will cutting the center bars give me the same type of performance any aftermarket grate will give me? will that CDI give me alot of noticeable performance difference?

  4. #4
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,155
    +1
    170
    After reading your first post...I would not cut the grate out if your in the ocean....you will suck to much air. You may think about a scoop grate instead. With your MODS yes on the CDI. Timing, higher limiter and the hotter spark will certainly give you more then the stock CDI box will.

    Mike

  5. #5

    CDI

    you think CDI, intake grate, and impeller will definitely give me a nice performance boost, make it noticeable faster?

  6. #6
    Mpeavler's Avatar
    Join Date
    Dec 2005
    Location
    Anderson, Indiana
    Posts
    5,155
    +1
    170
    All around more power for sure. More aggressive timing and will bring the most out of the mods you've done. We all run Riva CDI's in this section.....

    Scotty "Flying"
    Kris
    Myself

    etc....stock box is ok for a stock engine....if you opt for a box...get a Riva and or MSD Enhancer...both do the same trick.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. new SHO intake grate on GPR
    By flyboy in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 07-17-2008, 12:49 PM
  2. Crack above intake grate on my 03 GP1300R
    By Tim Langston in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 05-27-2008, 04:22 PM
  3. Need Picture Of Gti Intake Grate On Hull
    By US PERFORMANCE in forum 4-Tec Performance
    Replies: 30
    Last Post: 02-08-2008, 04:29 PM
  4. Install of riva intake grate On RXP
    By ADAMBOMB in forum 4-Tec Performance
    Replies: 6
    Last Post: 06-15-2007, 04:37 PM
  5. removing an intake grate on a 1100zxi
    By joshxp in forum Kawasaki Open Discussion
    Replies: 0
    Last Post: 05-18-2007, 08:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •