Results 1 to 4 of 4
  1. #1
    wakewhornc's Avatar
    Join Date
    Jul 2008
    Location
    Wilmington NC
    Posts
    339

    96 Raider 700 into a 96 SuperJet?

    I just picked up a 1996 Raider 700 with a Riva pipe and a 96 Superjet with no engine. I would like to take the motor out of the Raider (which supposedly runs but no way to know for sure) and put it in the Superjet. Ive been wanting a stand up for a while now and I came across this deal through a family friend. Paid nearly nothing for both with a double trailer. The skis are rough as all get out and no telling if the one engine runs. Both are missing the CDI box (or whatever you want to call it) but Id like to get the stand up to run. Is it worth the trouble to take the motor out of the raider and put it in the stand up and customize the exhaust a bit and buy a second hand CDI? Will this even work at all? I dont plan on keeping the Raider just want to have the Superjet and GPR on the same trailer. The pump turns freely so there is no problems there just wondering if this is worth my time and money. Any insight or known parts is a plus. Moderaters if you feel this needs to be in a different forum section please move this post.
    Thanks


  2. #2
    wakewhornc's Avatar
    Join Date
    Jul 2008
    Location
    Wilmington NC
    Posts
    339
    looking at the part numbers its a 97 superjet SJ700AV

  3. #3
    Mike xsockguyx's Avatar
    Join Date
    Sep 2007
    Location
    NJ
    Posts
    1,744
    +1
    2
    701 conversion in SJ happen all the time. I have one. www.x-h20.com is the stand up site and that will have all the info you'll need to go ahead with the project.

  4. #4
    wakewhornc's Avatar
    Join Date
    Jul 2008
    Location
    Wilmington NC
    Posts
    339
    The superjet had a 701 in it so I dont think its going to be a problem. My only consern now is if the Riva red pipe off the Raider will fit in the SJ hull?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Raider 700 Hull '96
    By wakewhornc in forum Yamaha Classifieds
    Replies: 2
    Last Post: 05-26-2010, 12:09 AM
  2. Salvaging my 96 Raider 700
    By Martimouse2 in forum Yamaha Projects & Build Threads
    Replies: 68
    Last Post: 10-17-2009, 12:56 PM
  3. WTB long bolt for pump housing, 96 Raider 700
    By Martimouse2 in forum Yamaha Classifieds
    Replies: 6
    Last Post: 08-11-2009, 06:16 PM
  4. Spline tool for '96 Raider 700
    By Martimouse2 in forum Yamaha How To & FAQs
    Replies: 0
    Last Post: 07-16-2009, 11:29 PM
  5. 96 Raider 700 Cavitation
    By slaloman in forum Yamaha Old School Skis
    Replies: 7
    Last Post: 04-19-2009, 11:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •