Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    2000 Polaris Pro 1200 rdizz81's Avatar
    Join Date
    May 2010
    Location
    Raleigh, NC
    Posts
    315

    Impeller?... pro 1200

    I dont understand listed on WCSS is 2 options

    15-24 and a 15-21 i ordered the 15-21 and that was too big it would scrape the stator so i got an RA and reordered the other option the 15-24 thinking that is going to work seeing how it is the only other option but when i look around i see this

    Pro 120000-0111653-bl. stainless148mm PA-CD 15/21 or XO PA-CD 16/22 or Xl

    StyleStock EngineLimited EngineModified EngineConcordPA-CD-15/21 Solas Concord Impeller Concord PA-CD-16/22 Solas Concord Impeller IJKPA-SC-I (15-24) Solas IJK Impeller PA-SC-I (15-24) Solas IJK Impeller PA-SC-I (15-24) Solas IJK Impeller Xprop PA-SC-XII (15.5-26) Solas XProp Impeller

    so the Solas concord 15/21 PA-CD will not fit
    was i correct to order the

    PA-SC 15-24 Solas IJK Impeller?




  2. #2
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,329
    +1
    31
    I'm not quite sure what you're asking.

    But all impellers for 1994 and newer are 148mm and should fit inside the wear ring with no problem. They are REAL tight with clearances of 4-20 thousandths.

    Unless you have a pump from a 1992-93, a special made pump, or the wear ring is distorted (salt water use will do that to the aluminum ones) the impeller should fit.

    How about some pics to help us understand?

  3. #3

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,702
    +1
    109
    That's because Slim Line props the need a longer spacer behind them see if SBT sells different length spacers

  4. #4
    2000 Polaris Pro 1200 rdizz81's Avatar
    Join Date
    May 2010
    Location
    Raleigh, NC
    Posts
    315
    so the whole problem was the spacer... and i already returned the other one damnit

    i thought it had to sit completly flush on the stator and still be able to spin

    the problem was the impeller that i got which was the PA-CD-15/21 Solas Concord Impeller when installed onto the stator would not spin there was not enough clearance it would scrape the stator veins...

  5. #5

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,702
    +1
    109
    Quote Originally Posted by rdizz81 View Post
    so the whole problem was the spacer... and i already returned the other one damnit

    i thought it had to sit completly flush on the stator and still be able to spin

    the problem was the impeller that i got which was the PA-CD-15/21 Solas Concord Impeller when installed onto the stator would not spin there was not enough clearance it would scrape the stator veins...
    yep the spacer is to short
    If you sent them both back i would just get a new NuJet 7.0

  6. #6
    2000 Polaris Pro 1200 rdizz81's Avatar
    Join Date
    May 2010
    Location
    Raleigh, NC
    Posts
    315
    PA-SC 15-24 Solas IJK Impeller this is the one that is on the way should be here tomorrow

    this one should work with the current spacer right?

    i cant seem to find another spacer lol

  7. #7

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,702
    +1
    109
    Quote Originally Posted by rdizz81 View Post
    PA-SC 15-24 Solas IJK Impeller this is the one that is on the way should be here tomorrow

    this one should work with the current spacer right?

    i cant seem to find another spacer lol
    i'm not sure if it's a slimline type prop no it won't

  8. #8
    2000 Polaris Pro 1200 rdizz81's Avatar
    Join Date
    May 2010
    Location
    Raleigh, NC
    Posts
    315
    any idea where i can get a new spacer?

  9. #9

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,702
    +1
    109
    Quote Originally Posted by rdizz81 View Post
    any idea where i can get a new spacer?
    Check with John at Speedwerks/HotSeat or Randy @ Watcon 360 692 3492 Try Randy first

  10. #10
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,587
    +1
    1,272
    Quote Originally Posted by 785 lugs View Post
    That's because Slim Line props the need a longer spacer behind them...
    What is the Polaris part number for the longer spacer?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Impeller question 2000 Pro 1200
    By rdizz81 in forum Polaris Open Discussion
    Replies: 5
    Last Post: 09-30-2010, 10:38 PM
  2. Pro 1200 Impeller ????
    By rizzo7883 in forum Polaris Open Discussion
    Replies: 8
    Last Post: 08-17-2009, 05:25 PM
  3. WTB 2000 SLX pro 1200 impeller back (pics of damage)
    By richsrq in forum Polaris Classifieds
    Replies: 8
    Last Post: 09-30-2008, 09:54 AM
  4. PRO 1200 Impeller
    By ShaneG in forum Polaris Open Discussion
    Replies: 3
    Last Post: 05-17-2008, 10:54 PM
  5. Rius takes pro 1200 world title in Havascrew...
    By 11 in forum Race Events and News
    Replies: 32
    Last Post: 10-20-2005, 11:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •