Results 1 to 4 of 4
  1. #1
    Resident electronics hacker UnityRacing's Avatar
    Join Date
    May 2007
    Location
    Va Beach, VA
    Posts
    1,425
    +1
    28

    EMM Colant routing for Virage TXi

    Whats the proper coolant line routing for a Virage TXi?
    Inlet to stator cover to EMM? Or EMM to stator cover?

    Where does the "out" line go from there?

    I'm dropping a 1200 into a virage 700 that I started a few years ago, I can't remember the routing on the donor genesis!


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,591
    +1
    1,275
    Quote Originally Posted by UnityRacing View Post
    Whats the proper coolant line routing for a Virage TXi?
    Inlet to stator cover to EMM?

    ...Where does the "out" line go from there?

    I'm dropping a 1200 into a virage 700 that I started a few years ago, I can't remember the routing on the donor genesis!
    From the EMM the cooling water exits at the exhaust outlet at the rear of the hull.

    There should be a nipple on the large exhaust hull fitting. You may need to drill the nipple open if it is sealed on the 700 hull.

  3. #3
    Resident electronics hacker UnityRacing's Avatar
    Join Date
    May 2007
    Location
    Va Beach, VA
    Posts
    1,425
    +1
    28
    I looked and didnt see a nipple... Any pictures?

    Wouldn't it make more sense to just install a pisser up front so I can see that there is proper water flow through the EMM?

    Any chance I can see a few pics of the inside of a TXi hull so I can see where to route the wiring/cables/air inlet hoses, etc ?

    Thanks!

  4. #4
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,591
    +1
    1,275

    Arrow EMM cooling water exit fitting on Ficht exhaust (2002 Virage i hull shown)

    Quote Originally Posted by UnityRacing View Post
    I looked and didn't see a nipple... Any pictures?

    Wouldn't it make more sense to just install a pisser up front so I can see that there is proper water flow through the EMM?

    Any chance I can see a few pics of the inside of a TXi hull so I can see where to route the wiring/cables/air inlet hoses, etc ?

    Thanks!
    See attached photo. You can just see the gray water line going to the hull exhaust exit. Polaris actually used fuel hose for the small water lines.

    A pisser from the EMM water exit sounds like a fine idea.

    Mount it so the pisser stream is visible, but won't be blowing back on you when the wind is coming from the 'wrong' direction.

    It is hard to take photos that show the hull interior clearly. Hard to get far enough back. I will see what I can do

    Maybe later today... Done.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P5240088.jpg 
Views:	74 
Size:	91.2 KB 
ID:	190778   Click image for larger version. 

Name:	DSCN4239b.jpg 
Views:	74 
Size:	62.8 KB 
ID:	190788   Click image for larger version. 

Name:	DSCN4240.jpg 
Views:	68 
Size:	49.4 KB 
ID:	190789   Click image for larger version. 

Name:	DSCN4241.jpg 
Views:	70 
Size:	71.0 KB 
ID:	190790   Click image for larger version. 

Name:	DSCN4243.jpg 
Views:	66 
Size:	24.4 KB 
ID:	190791   Click image for larger version. 

Name:	DSCN4230.jpg 
Views:	76 
Size:	67.2 KB 
ID:	190792  

    Click image for larger version. 

Name:	DSCN4231.jpg 
Views:	72 
Size:	68.8 KB 
ID:	190793   Click image for larger version. 

Name:	DSCN4233.jpg 
Views:	71 
Size:	56.2 KB 
ID:	190794   Click image for larger version. 

Name:	DSCN4234.jpg 
Views:	74 
Size:	66.7 KB 
ID:	190795   Click image for larger version. 

Name:	DSCN4237.jpg 
Views:	72 
Size:	76.1 KB 
ID:	190797  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB Need emm for 2002 virage txi
    By kc44408 in forum Polaris Classifieds
    Replies: 9
    Last Post: 10-23-2012, 11:12 AM
  2. Battery for Virage txi-2002
    By PERCMAN25 in forum Polaris Open Discussion
    Replies: 1
    Last Post: 05-05-2010, 01:32 PM
  3. WTB: EMM & Injectors for 2002 Virage TXi
    By tenjuna in forum Polaris Classifieds
    Replies: 0
    Last Post: 09-07-2009, 05:32 PM
  4. Replies: 20
    Last Post: 06-01-2009, 08:32 PM
  5. 2002 virage txi emm reprogram?
    By gwl in forum Polaris Open Discussion
    Replies: 4
    Last Post: 08-10-2008, 10:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •