Results 1 to 8 of 8
  1. #1
    maestro's Avatar
    Join Date
    Aug 2008
    Location
    GR
    Posts
    139

    boost gauge install on rxp with STOCK ic. HELP

    I made a search about it but i found nothing
    If someone has allready install a boost gauge on a rxp with stock ic or knows the how to about it,
    any input or fotos its gonna help me.

    Thanks


  2. #2
    no reverse jayohentran's Avatar
    Join Date
    Mar 2008
    Location
    virginia
    Posts
    543
    +1
    1
    just look up the riva instructions to install the bov, to get pictures of how/where to tap for reference on the manifold. then instead of connecting it to a bov, just use that line and run to a boost gauge.

  3. #3
    Codeman666's Avatar
    Join Date
    Aug 2007
    Location
    sunny south florida
    Posts
    179
    +1
    8

    Re: boost gauge install on rxp with STOCK ic. HELP

    There's three small cylinder looking outputs on the intake manifold drill through the one on the middle port the one under the ecu and connect your boost gauge line to that

  4. #4
    pass1's Avatar
    Join Date
    Apr 2009
    Location
    Gatineau, Canada
    Posts
    423
    +1
    5
    so... if I understand correctly, drilling the nipple will allow the pressure to escape and feed the gauge.
    Then... the line just slip over the nipple??
    What kind of clamp is used to secure the line to the nipple??

  5. #5

    Join Date
    Apr 2008
    Location
    Plainfield, IL
    Posts
    1,237
    +1
    10
    Use a zip tie or two.

  6. #6
    Codeman666's Avatar
    Join Date
    Aug 2007
    Location
    sunny south florida
    Posts
    179
    +1
    8

    Re: boost gauge install on rxp with STOCK ic. HELP

    Yea just a zip tie is good make sure you remove the intake maniold before drilling what I did is took all the bolts out put a piece of cardboard blocking the port on the head in between the head and manifold and then drilled It then blew it out against the cardboard then tightened the manifold and it's good to go

  7. #7
    pass1's Avatar
    Join Date
    Apr 2009
    Location
    Gatineau, Canada
    Posts
    423
    +1
    5
    thanks guy's!!!

  8. #8
    maestro's Avatar
    Join Date
    Aug 2008
    Location
    GR
    Posts
    139
    great tips

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 8
    Last Post: 06-20-2012, 03:43 PM
  2. Need help installing XS intercooler in 05 RXP with stock exhaust
    By linuxglobal in forum 4-Tec Performance
    Replies: 13
    Last Post: 01-23-2011, 08:32 PM
  3. Boost gauge installation RXP-X
    By Spdfreakls1 in forum 4-Tec Performance
    Replies: 12
    Last Post: 06-24-2009, 01:43 PM
  4. My boost gauge Installation: Lookin for opinions
    By Shibby1485 in forum Sea Doo Open Discussion
    Replies: 25
    Last Post: 07-22-2006, 11:40 AM
  5. Speakers installed on RXP
    By slugo10 in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 05-10-2006, 03:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •