Results 1 to 6 of 6
  1. #1
    2000 GPRXP 4tec shooter98xpl's Avatar
    Join Date
    Dec 2005
    Location
    Charleston SC
    Posts
    2,717
    +1
    3

    2000 XLT convert to 1300 setup

    Has anybody tried to put a 1300 in a 2000 xlt hull with an efi setup? What did you do for the throttle cable to make it work? Mine is not long enough, is there another cable to use. I rigged it to fit for now, but if there is another cable out there or some type of adapter I'd like to know please. Thanks,
    SHOOTER


  2. #2
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by shooter98xpl View Post
    Has anybody tried to put a 1300 in a 2000 xlt hull with an efi setup? What did you do for the throttle cable to make it work? Mine is not long enough, is there another cable to use. I rigged it to fit for now, but if there is another cable out there or some type of adapter I'd like to know please. Thanks,
    SHOOTER
    Hello Larry, The factory runs the cable from the bottom of the pipe i ran mine from the top on my efi conversion on my XLL and it reached fine.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	100_1920.jpg 
Views:	30 
Size:	117.1 KB 
ID:	191037   Click image for larger version. 

Name:	100_1919.jpg 
Views:	27 
Size:	121.2 KB 
ID:	191038  

  3. #3
    2000 GPRXP 4tec shooter98xpl's Avatar
    Join Date
    Dec 2005
    Location
    Charleston SC
    Posts
    2,717
    +1
    3
    Hey Jim, I haven't put the pipe in yet. My problem is trying to run it up through the hull and to the throttle. Mine just seems short. So I went through the air tube, up into the cowling, up into the handle bars. I have the oil injection cable and the throttle cable on, but still its too short. SO I had to do some modifications. How did you run the cable up through the top of the hull? Maybe I missed something.
    SHOOTER

  4. #4
    Shooter, I am running pre mix on mine so I used just the throttle cable out of my XLT800 ski. The cable is 1 foot longer than the 1200 and worked out awesome!!!

  5. #5
    2000 GPRXP 4tec shooter98xpl's Avatar
    Join Date
    Dec 2005
    Location
    Charleston SC
    Posts
    2,717
    +1
    3
    Want to stay with the oil injection setup. Can you use the cable off of a gpr1200 carb setup for the efi throttle bodies?
    SHOOTER

  6. #6
    Thats what I had on the ski originally and I had the same problem I got it to fit but it was extremely tight and that was with the exhaust off.......Actually sorry just reread your post I used the original xlt1200 cable on the first try

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 2000 XLT with 1300 EFI setup
    By shooter98xpl in forum Yamaha 2 Stroke Skis
    Replies: 2
    Last Post: 08-26-2010, 01:30 PM
  2. WTB HO / SKAT PUMP SETUP for gp1200 being converted to a gprxp
    By RXPSTUNNA in forum Yamaha Classifieds
    Replies: 2
    Last Post: 07-27-2010, 01:41 AM
  3. 2000 xlt 1200 Poppping at low speed to 4k rpm
    By shogan in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 07-04-2010, 04:54 PM
  4. FS 2000 xlt - 1300 efi
    By shooter98xpl in forum Yamaha 2 Stroke Skis
    Replies: 0
    Last Post: 04-14-2010, 05:03 PM
  5. Converting to 1300 questions
    By Yellow93 in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 08-16-2007, 04:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •