Results 1 to 3 of 3
  1. #1
    Buds06RXP's Avatar
    Join Date
    Sep 2006
    Location
    Simpsonville, SC
    Posts
    64

    How far to take the mods?

    Ok, I currently have the Riva stage I on my 06. From the inputs I have recently on here I am planning to go up to or slightly above the level of stage II. I am planning at the moment to add the RE blockoffs (ordered) and then a power cooler, likely the Rotax SC impeller and metal washers, through hull exhaust (great to hear it won't be plastic piped!), 42# injectors, and of course filling in the grate bolt holes.
    Now I need some suggestions on the prop. Currently I am running the Riva stage I (14/19 Solas). Should I go to the 15/20 or equivilent? Is it better if tweaked a bit?
    How would this set up runout compared to the full Riva II?


  2. #2
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    You have a great plan there. You will definately out perform the regular stage 2 kits with the RR SC impeller.
    Look forward to stepping up to the 15/20. Some pitch work may be needed to get optimum RPM's. I'll be happy to help you out with that.

  3. #3
    Buds06RXP's Avatar
    Join Date
    Sep 2006
    Location
    Simpsonville, SC
    Posts
    64
    Quote Originally Posted by Green Hulk
    You have a great plan there. You will definately out perform the regular stage 2 kits with the RR SC impeller.
    Look forward to stepping up to the 15/20. Some pitch work may be needed to get optimum RPM's. I'll be happy to help you out with that.

    Well I may in deed be sending you the SC to add the impeller. Might do the same on the 15/20.
    Still need to make sure everything fits into the plan without getting TOO crazy on the cash. I will likely kick in the mods in a couple of more weeks. I should still have another week or two riding before it starts colling down here in SC.

    Thanks!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 3
    Last Post: 09-06-2016, 10:15 PM
  2. Anyone know how to take the glove box lid off an XLT?
    By thetolleyman in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 12-30-2012, 11:11 PM
  3. How to take a Modded Ultra 150 back to Stock
    By Ultra151 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 4
    Last Post: 06-20-2011, 01:38 PM
  4. LOL, How NOT to take a ski out of the water
    By 750sl in forum Polaris Open Discussion
    Replies: 5
    Last Post: 07-23-2010, 09:34 PM
  5. How to take the cylinder off a 1997 polaris sltx 1050
    By grifter in forum Polaris How To & FAQs
    Replies: 3
    Last Post: 09-13-2007, 11:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •