Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    SCKid's Avatar
    Join Date
    May 2007
    Location
    New York
    Posts
    23

    Supercharger Torque Specs

    I recently purchased a 05 RXP, it sat for 3 years and only had 4 hours on it! Unfortunately I sucked some debris through the intake from a nest that mice had in the air intake. So I just finished up cleaning the intake manifold, throttle body, and supercharger. I split the supercharger and need to know what the torque specs are on it? That is the bolts that hold the the outer casting to the supercharger itself.


  2. #2
    Codeman666's Avatar
    Join Date
    Aug 2007
    Location
    sunny south florida
    Posts
    179
    +1
    8
    those should be torqued at 22ft lbs with loctite 243 which is the blue one i would put the sequence on here but my manual wont let me copy it

  3. #3
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46
    Quote Originally Posted by Codeman666 View Post
    those should be torqued at 22ft lbs with loctite 243 which is the blue one i would put the sequence on here but my manual wont let me copy it
    Tighten them to the torque above, dont worry about the sequence, I never have just make sure there is a nice bit of sealent on the housings and tighten them down, what i would do is nip them all up first then go round then torque them up. R88

  4. #4
    SCKid's Avatar
    Join Date
    May 2007
    Location
    New York
    Posts
    23
    Thanks for the reply, I am going to seal it with Permatex High Temp sealant. What manual do you have? I have the 05 shop manual and it has nothing on the supercharger which is odd...

  5. #5
    Codeman666's Avatar
    Join Date
    Aug 2007
    Location
    sunny south florida
    Posts
    179
    +1
    8
    that is weird i have both the 06 and 07 shop manuals

  6. #6
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Quote Originally Posted by SCKid View Post
    I recently purchased a 05 RXP, it sat for 3 years and only had 4 hours on it! Unfortunately I sucked some debris through the intake from a nest that mice had in the air intake. So I just finished up cleaning the intake manifold, throttle body, and supercharger. I split the supercharger and need to know what the torque specs are on it? That is the bolts that hold the the outer casting to the supercharger itself.
    Don't torque the housing bolts to 22ftlb they will break.

  7. #7
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    The SCer housing bolts are 97 inlbs.

  8. #8
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Quote Originally Posted by jp1300r View Post
    Don't torque the housing bolts to 22ftlb they will break.
    +1

    Quote Originally Posted by jp1300r View Post
    The SCer housing bolts are 97 inlbs.
    +1.

  9. #9
    masta2000's Avatar
    Join Date
    Aug 2009
    Location
    montreal-quebec
    Posts
    576
    +1
    1
    just check on the riva website in the charger impeller upgrade section, they have all the instructions there

  10. #10
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    22 ft Lbs is for the lock nuts on the ends of the Scer shaft....

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. head bolt torque specs
    By DaGoblinEatR in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-21-2006, 11:43 PM
  2. Bolt "Stretch" VS. Torque Specs
    By ABBOTT in forum Yamaha How To & FAQs
    Replies: 7
    Last Post: 08-03-2006, 12:21 AM
  3. important impeller removal torque specs?
    By RXP-REX in forum Sea Doo Open Discussion
    Replies: 10
    Last Post: 07-09-2006, 09:21 PM
  4. Charger Torque Specs Help
    By SpeedStang95 in forum 4-Tec Performance
    Replies: 1
    Last Post: 07-30-2005, 04:51 PM
  5. Anyone have their RXP shop manual handy - torque specs.
    By Thomas in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-07-2005, 04:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •