Thread: RXP Holeshot Advice?
06-09-2010, 02:25 AM #1
RXP Holeshot Advice?
Trying to determine the best trim position w/Riva wedge for optimal holeshot on my RXP. I don't have the extension rod, yet.
Reason I ask is it seems like when I nail it from idle it pops out of the water or just isn't stuffing the pump. I've also not had enough time or smooth water lately to experiment.
I did a search but couldn't find anything.
Thanks in advance,
06-09-2010, 06:47 PM #2
06-09-2010, 06:56 PM #3
trim all the way down and lean over the handlebars!
06-09-2010, 07:50 PM #4
Trim right down, Bang the throttle, and at the same time(Simultaneously), press the up button on the trim. Once it gets to the top, two taps back down works for me, and then am about balanced right.
06-10-2010, 10:18 AM #5
First! Look for your/that sweet spot in wot. Now you going to practice and focus in your vts guage bar. With the vts/trim all the way down you going to count to that sweet spot. How many sec. its took for the vts/trim get to that sweet spot 1,2,3,4,5 sec. With that out of the way and automatic in your head. Now you ready to lean over the handle bar and do step one. Remember drag racing is only 600' and not 2 miles in wot. I hope this help. You going to say WTF but it works for me!
06-10-2010, 02:44 PM #6
Thanks for the tips guys.
Will the Extension Rod make that much of a difference or is it a waste of money?
06-10-2010, 02:57 PM #7
trimming all the way down with the wedge is like having the vts at 2 or 3 clicks up from the bottom without a wedge. the ext. rod will allow for the downward adjustment to come back.
06-10-2010, 08:15 PM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Lurker in forum 4-Tec PerformanceReplies: 5Last Post: 03-28-2008, 05:45 AM
By Suthrn in forum 4-Tec PerformanceReplies: 4Last Post: 06-24-2007, 10:20 PM
By Vern in forum 4-Tec PerformanceReplies: 12Last Post: 07-17-2006, 02:01 PM
By NeverEndn in forum 4-Tec PerformanceReplies: 13Last Post: 07-11-2006, 12:20 AM
By seadawg in forum 4-Tec PerformanceReplies: 2Last Post: 07-03-2006, 09:24 AM