06-10-2010, 10:47 AM #1
Torque spec on intake grate bolts
I just purchased a R&D intake grate and im wondering what are the torque specs on these bolts? Also, do I need to use any loctite or anti-seize on these bolts? Not sure if it matters or not but the grate is going on a RXP-X
06-10-2010, 11:53 AM #2
- Join Date
- Jan 2009
- Scotland, UK
Just checked the shop manual for my 08 RXT-X. Front bolt torque is 26 N.M (19 lbf.ft) with Loctite 243. Back three bolts are 11 N.M (97 lbf.in) with Loctite 271. Not sure why there is different Loctite for the back bolts.
Hope this helps.
Last edited by heckie; 06-10-2010 at 11:54 AM. Reason: ammendment
06-10-2010, 12:07 PM #3
no loctite if possible, ive never had one back out...just use a small amount if you do...
just use a 1/4in wrench and go off feel
06-10-2010, 07:37 PM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mksmi in forum 4-Tec PerformanceReplies: 25Last Post: 01-21-2008, 08:19 PM
By Jetscreamer in forum Yamaha PWC Performance (2-stroke)Replies: 22Last Post: 05-31-2007, 09:29 AM
By Sandy in forum Sea Doo Open DiscussionReplies: 10Last Post: 04-01-2007, 02:48 PM
By N8R in forum Yamaha How To & FAQsReplies: 4Last Post: 07-03-2006, 11:18 PM
By Kinchyle in forum Sea Doo Open DiscussionReplies: 9Last Post: 05-12-2006, 07:35 PM