Results 1 to 3 of 3
  1. #1

    wanting to buy 250 ultra 07 pump housing

    looking for pumping housing for a 2007 250 Ultra .
    The two bolt holes on the bottom that the ride plate bolt to, were messed up when the bolt came loose and were sheered off when docking on a ski lift. It doesn't look like I can cut them out with out oversizing the holes.

    looking for a complete pump housing , that does not need a rebuild


  2. #2
    Moderator DrewNJ's Avatar
    Join Date
    Dec 2005
    Location
    Marlton, NJ
    Posts
    3,716
    +1
    1
    Quote Originally Posted by pierstar View Post
    looking for pumping housing for a 2007 250 Ultra .
    The two bolt holes on the bottom that the ride plate bolt to, were messed up when the bolt came loose and were sheered off when docking on a ski lift. It doesn't look like I can cut them out with out oversizing the holes.

    looking for a complete pump housing , that does not need a rebuild
    Just FYI, if that is your only problem then just grind them down and leave the bolts out. I don't have the bolts in my Riva plate...I actually ground the bosses flat and filled the holes. The R&D plate doesn't even have provisions for the bolts to begin with.
    For what it's worth I'm also not a big fan of attaching the pump to the plate anyway...Ive seen how much a ride plate flexes and don't really want to use my pump as a "support"...but that's just me.

  3. #3
    jmatak9's Avatar
    Join Date
    Jul 2009
    Location
    St. Cloud, Fl
    Posts
    435
    I never thought of that (ride plate flexing) I'm going to fill my holes also. Good advice.

    Quote Originally Posted by DrewNJ View Post
    Just FYI, if that is your only problem then just grind them down and leave the bolts out. I don't have the bolts in my Riva plate...I actually ground the bosses flat and filled the holes. The R&D plate doesn't even have provisions for the bolts to begin with.
    For what it's worth I'm also not a big fan of attaching the pump to the plate anyway...Ive seen how much a ride plate flexes and don't really want to use my pump as a "support"...but that's just me.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Want to buy: Set of (3) cylinders and pistons for 07' gp1300
    By Quicky in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 08-07-2010, 02:42 PM
  2. Wanting to buy a 07 vx 110
    By ianschrd in forum Yamaha PWC Performance (4-stroke)
    Replies: 1
    Last Post: 06-27-2010, 09:57 PM
  3. want to buy ultra 250 or 260 pistons
    By smokeysevin in forum Kawasaki Classifieds
    Replies: 1
    Last Post: 08-28-2009, 07:56 PM
  4. want to buy carbon tech reed petals for ultra 150
    By ultraskiit in forum Kawasaki Classifieds
    Replies: 0
    Last Post: 02-10-2009, 10:56 AM
  5. Where to BUY a Ultra 250 and What to PAY???
    By Vengeance Racing in forum Kawasaki PWC Performance (4-stroke)
    Replies: 21
    Last Post: 05-25-2007, 12:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •