Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: turbo set up

  1. #1
    ctriverguy's Avatar
    Join Date
    Aug 2007
    Location
    Ipswich, Massachusetts, United States
    Posts
    1,509
    +1
    8

    turbo set up

    listing for sale is a real garrett gt2871 (see spec sheet) with 3 hours total run time. rated 400hp, just to give you a ball park number max PSI is, depending on air flow 24-26 psi

    I bought turbo brand new, and assembled torqued to spec.

    Turbo snail (hot side), up pipe, and down pipe are "white lightning" ceramic coated. also have addition 8m studs and allen head screws

    up pipe: water jacketed stainless, has port for AFR (from ski md) includes manifold clamp (same as pre 08 models)

    down pipe is water injected stainless (from ski md as well), to CP performance 3" stainless silencer, to Hydrojunkie stainless downturn tip.

    all water water plumbing included: stainless braided hose with russel AN fittings

    oil lines: inlet line: stainless braided with gauge and restrictor AN fitting
    out line: just converted high temp swagelock fittings with 5/8 stainless tube which then connected to hight temp silicon wrapped in stainless, then clamped to a custom fitting that sits in the SC hole. Also have extra oil return gaskets


    boost outlet side will come with a black silicone 2-2.5 90 degree bend, and 4 inches of stainless pipe with a 1/8th nipple for boost control

    Boost control is a turbosmart boost controller

    wastegate is stock internal, the extension rod makes it completely adjustable

    DEI titanium snail wrap and titanium header wrap

    clamps are a mix of stainless worm gear and t-bolt

    Pipes are dirty from dirty hands removing, I had an oil leak from a silicone oil which made a mess. pics are from phone

    set up is currently out, i am putting back in my ski for the holiday weekend to confirm it runs fine with no leaks... i can video or pic it in the ski or i can keep it out if a buyer is serious and prefer it stay out.. up to you..

    I will be riding in Western Mass sat and sunday if you would like to see it in person. this set up is fast, and very loud.. selling to be more family friendly, with the limited time i have to ride.

    If you have questions call me Bob 978 778 8179 currently in North shore MA

    asking price is 3000 or obo.. I do want it gone
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	turbo and plumbing.jpg 
Views:	170 
Size:	85.7 KB 
ID:	194072   Click image for larger version. 

Name:	turbosmart boost controller.jpg 
Views:	123 
Size:	101.2 KB 
ID:	194073   Click image for larger version. 

Name:	hydro exhaust tip.jpg 
Views:	112 
Size:	80.3 KB 
ID:	194074   Click image for larger version. 

Name:	oil drain fitting.jpg 
Views:	112 
Size:	87.1 KB 
ID:	194081   Click image for larger version. 

Name:	dei titanium wrap.jpg 
Views:	95 
Size:	91.1 KB 
ID:	194082   Click image for larger version. 

Name:	stainless lines.jpg 
Views:	98 
Size:	65.7 KB 
ID:	194083  



  2. #2
    Gone in 3.0 seconds... RXPT400's Avatar
    Join Date
    Nov 2007
    Location
    USA
    Posts
    1,527
    do you have pictures of the backhousing with the downpipe??...does that come with injectors and prop???...

  3. #3
    ctriverguy's Avatar
    Join Date
    Aug 2007
    Location
    Ipswich, Massachusetts, United States
    Posts
    1,509
    +1
    8
    Quote Originally Posted by RXPT400 View Post
    do you have pictures of the backhousing with the downpipe??...does that come with injectors and prop???...

    im keeping injectors and prop (just 60's and a repitched 15/22, nothing special)

    i have not dialed in this set up in my ski with a prop thats been pitched to match 18psi.. i was running 11psi before replacing oil line. egt's (measured at manifold) were WOT: 1450 F Idle: 850 F AFR was in low 12's (I was in rough water, and could not get closer) No back pressure data.

    i have run 13psi at 8550rpm with a smaller turbo (gt28r) and was just below 80 on gps.. this was high egts 1650+


    back housing is 5 bolt will post pics tonight..

  4. #4
    ctriverguy's Avatar
    Join Date
    Aug 2007
    Location
    Ipswich, Massachusetts, United States
    Posts
    1,509
    +1
    8
    this is a pic on my pc of back side housing
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	coating and fuel pump.jpg 
Views:	109 
Size:	56.6 KB 
ID:	194087  

  5. #5
    ctriverguy's Avatar
    Join Date
    Aug 2007
    Location
    Ipswich, Massachusetts, United States
    Posts
    1,509
    +1
    8
    wow, 24 hours and its 3 pages deep...bring offers


    ttt

  6. #6
    Chris0060's Avatar
    Join Date
    Sep 2007
    Location
    CT
    Posts
    1,174
    Bump for a great seller...

  7. #7
    ctriverguy's Avatar
    Join Date
    Aug 2007
    Location
    Ipswich, Massachusetts, United States
    Posts
    1,509
    +1
    8
    this set up is solid... new price $2500 plus shipping, paypal on me.

  8. #8
    nice setup i am suprised this thing is still for sale ,
    thought i give it a free bump

  9. #9
    ctriverguy's Avatar
    Join Date
    Aug 2007
    Location
    Ipswich, Massachusetts, United States
    Posts
    1,509
    +1
    8
    ttt

  10. #10

    Join Date
    Jul 2005
    Location
    euxton nr chorley lancashire, england
    Posts
    1,500
    +1
    1
    will this tubo setup fit an 05 gtx ltd? or will the pipe work have to be modded?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Turbo set up
    By gomzi4629 in forum Conversion FAQ and Tips
    Replies: 0
    Last Post: 09-03-2012, 05:22 AM
  2. Finally got my aftercooler and Turbo set up in *pic*
    By mongorunner in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 08-04-2011, 10:45 PM
  3. WTB 3 blade rxp prop for turbo set up
    By trent_girardrxp in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 11-12-2010, 10:24 AM
  4. turbo set up
    By jetskibill9999 in forum 4-Tec Performance
    Replies: 0
    Last Post: 09-13-2010, 05:34 PM
  5. Damn i need to build me back a rude or Turbo set-up...!!!
    By Jeepster in forum Sea Doo Sport Boats
    Replies: 5
    Last Post: 09-10-2008, 05:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •