Results 1 to 10 of 10
  1. #1
    V-Tec, 4-Tech that's how I roll meirvin's Avatar
    Join Date
    Feb 2006
    Location
    Dallas/Ft Worth, Tx
    Posts
    1,514
    +1
    3

    RXT Runs but no Display?

    Took the girlfriends 05 RXT with approx 160 hrs, out Friday and after idling out past the no wake zone gave it the gas and it went into what felt like limp Mode and the display suddenly quit displaying although the engine kept running back to the dock.

    Have checked the fuses
    and general looking around at electrical harnesses.

    Any other suggestions?

    Working on borrowing a ECU to switch out with but IDK if it will happen (anyone have one to let me borrow will pay shipping and am trustworthy)

    thanks
    Mike Irvin


  2. #2
    V-Tec, 4-Tech that's how I roll meirvin's Avatar
    Join Date
    Feb 2006
    Location
    Dallas/Ft Worth, Tx
    Posts
    1,514
    +1
    3
    no one has any ideas?

  3. #3

    Join Date
    Jun 2010
    Location
    FONTANA,CA
    Posts
    6
    CHECK YOUR GROUND CABLE,HAD THE SAME THING,TURNS OUT THE BATTERY CABLE WAS LOOSE.

  4. #4
    Swedish Viking Craigo's Avatar
    Join Date
    Jun 2008
    Location
    Seattle
    Posts
    1,367
    +1
    62
    Quote Originally Posted by WILLFLO View Post
    CHECK YOUR GROUND CABLE,HAD THE SAME THING,TURNS OUT THE BATTERY CABLE WAS LOOSE.
    I love it when people join greenhulk.net just help other riders!!!

    Welcome WILLFLO!!!

  5. #5

    Join Date
    Jun 2010
    Location
    Tampa Fl
    Posts
    65
    The same thing happened to mine but they had to replace the engine harness so i guess mine was the worst case scenario

  6. #6
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    Check what SD calls bus bars inside the fuse box. Also the white resistor inside the fuse box.

  7. #7
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    6,518
    +1
    1,266

    rough waters ahead

    don't just plug another ecu in there, you need buds to set things up properly and a replacement ecu needs to be set up for that console.

    Follow advise on obvious harness and fuse issues. Consoles are brutal expensive and then the trip to the dealer to get it set up.

    Check peak battery voltage with the engine running at 3-5 k on the hose ( just for a sec aor two), the regulator may have given up and zapped the console..don't catch it and the mpem or ecu could be next. Shouldn't be over 14v.

  8. #8
    V-Tec, 4-Tech that's how I roll meirvin's Avatar
    Join Date
    Feb 2006
    Location
    Dallas/Ft Worth, Tx
    Posts
    1,514
    +1
    3
    thanks guys I will try some of these this weekend

  9. #9
    THE OFFICAL SUPERDUTY!!!!!! superduty's Avatar
    Join Date
    May 2006
    Location
    Webster, Texas
    Posts
    4,726
    +1
    5
    how much trouble are you in lol

  10. #10
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    6,518
    +1
    1,266
    an o5 rxp I was doing a deep water recovery on just had the console go out alos...last time that happened the ecu had taken a dunk and nothing worked ( engine cranked).. I'd like to avoid sending this guy to the local dealer ( had to do that last time) for a buds programming, so I guess I'll start poking around the harness and fuse boxes. This ski sat out of water for at least a week before I got my hands on it, so I'm wondering if I'm jsut wsting time chasing a harness problem ( the console was working until I started the flush procedure..just like the last time)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. polaris 140 msx runs but no power
    By Douggie45 in forum MSX/Matrix
    Replies: 4
    Last Post: 08-14-2013, 05:19 PM
  2. 2000 ultra 150, runs perfect in the water but no water from pissers on hose
    By dsnotgood in forum Kawasaki PWC Performance (2-stroke)
    Replies: 2
    Last Post: 09-02-2012, 04:08 PM
  3. 2010 RXT-X with no Display
    By RagingDiablo666 in forum 4-Tec Performance
    Replies: 3
    Last Post: 09-16-2011, 08:40 AM
  4. 97 seadoo gsi motor runs good but no propulsion
    By Iam1hugeguy in forum 2-Stroke Performance
    Replies: 0
    Last Post: 07-04-2011, 11:24 PM
  5. 97 SeaDoo GTX runs out of water but no power & max rpm @ 3200 in water
    By Irish Democrat in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 08-14-2009, 09:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •