Results 1 to 10 of 10
  1. #1
    race24x's Avatar
    Join Date
    May 2007
    Location
    Fayette, Maine
    Posts
    1,005

    Couple of questions

    1. I have an impeller tool from my 98 XP Limited. Can I use that on my 06 RXT I need to take impeller out to have repitched.

    2. Yesterday while riding my speedo was reading a little erratic and low. I know they are not great for telling speed, but I was just goofing off and didnt bring my GPS. On the way out full tank 8120 PRM 69 MPH easy after riding and goofing same 8120 RPM but 66 and bouncing 64 - 67 in smooth water. I have never noticed this before. I checked my grate for weeds etc it was clean.

    3. If having impeller repitched should I flip my wear ring (can you do that on these boats) or repalce it just cause I am there. Should I stay away from any in particular? SBT?

    4. Should I get the inexpensive just block offs or is there an advantage of buy ing the more expensive ones that extend over the spot where the OPAS was?


    I have almost everything I wanted to bolt on this year ( 2* pump wedge, 4" air intake kit, Riva intake grate) I just want to make sure nothing is wrong just before I start putting this stuff in.


  2. #2
    race24x's Avatar
    Join Date
    May 2007
    Location
    Fayette, Maine
    Posts
    1,005
    TTT

  3. #3
    race24x's Avatar
    Join Date
    May 2007
    Location
    Fayette, Maine
    Posts
    1,005
    Maybe any of the questions? For instance the tool will it work from my XPL are the driveshaft splines the same or do I need to buy a new one? Or some ones opinion on the block offs?

  4. #4
    race24x's Avatar
    Join Date
    May 2007
    Location
    Fayette, Maine
    Posts
    1,005
    Wow 88 views, really no one knows? I tried searching some. Did I piss you all off LOL

  5. #5
    Mod less, ride more! troyheb's Avatar
    Join Date
    Jul 2007
    Location
    Nederland, Texas
    Posts
    8,725
    +1
    1,267
    1. Dont believe you can use the same tool.
    2. I would not pay any attention to the speedo.
    3. Yes you can filp it. I have not heard good things about SBT.
    4. I have no experience with opas block offs.
    5. That was more than a couple of questions.

  6. #6
    race24x's Avatar
    Join Date
    May 2007
    Location
    Fayette, Maine
    Posts
    1,005
    Thanks Troy, I will go to the stoer and buy another damn tool LOL I just didnt want to take it all apart and not have the right tool to get the impeller off.

  7. #7
    Work Harder, Millions on Wellfare Depend On Us! ultramaxracing05's Avatar
    Join Date
    Aug 2009
    Location
    Beaumont, Texas
    Posts
    2,999
    +1
    123
    I read that the cheap opas block off might cause porpoising but maybe not in your case since you wont be going really fast.

  8. #8
    ANASTY's Avatar
    Join Date
    Mar 2010
    Location
    High Rock Lake NC
    Posts
    28
    1. impeller tool deff wont work
    2. wouldnt worry if turnin same rpm
    3. ive got the cheap block offs no probs for me
    4. i had sbt wear ring and it was shit much tighter fit with oem

  9. #9
    Work Harder, Millions on Wellfare Depend On Us! ultramaxracing05's Avatar
    Join Date
    Aug 2009
    Location
    Beaumont, Texas
    Posts
    2,999
    +1
    123
    Bigbubba is selling an impeller tool for 15 you might want to grab it, its under the Seadoo Classifieds

    http://www.greenhulk.net/forums/showthread.php?t=126142

  10. #10
    race24x's Avatar
    Join Date
    May 2007
    Location
    Fayette, Maine
    Posts
    1,005
    Thanks I sent him a message 15 bucks is cheap enough. I am suer as I build this one I will need to replace and repitch the prop from time to time. Thanks for the other answers. I will go look inj the online store for an OEM wear ring.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New '07 150 SCIC owner, couple of questions.
    By Armand28 in forum Sea Doo Sport Boats
    Replies: 3
    Last Post: 05-26-2007, 04:40 AM
  2. Couple of questions?
    By SeanJ in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 05-13-2007, 11:46 PM
  3. Newbie saying hi, and a couple of questions.
    By aussie rxp in forum 4-Tec Performance
    Replies: 5
    Last Post: 03-06-2007, 01:02 AM
  4. Couple of questions please help...
    By OzVirage in forum Polaris Open Discussion
    Replies: 6
    Last Post: 02-12-2007, 08:39 PM
  5. Replies: 171
    Last Post: 11-04-2006, 06:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •