Results 1 to 5 of 5
  1. #1

    Join Date
    Jul 2008
    Location
    Orange County, NY
    Posts
    131

    Oil In Pump Inlet Housing?

    I've been fooling with PWC's for a while but I'm no expert and I'm trying to help my cousin get a 1995 Montego together that was given to him. We've got everything covered except he told me one thing that has be scratching my head. Now I wasn't there when he pulled the pump apart but he said that when he pulled the impeller shaft out a bunch of oil came out. I never heard of there being oil in the pump but this is the first TS I have fooled with. Is this right? What oil should be used in there and how much? Can I use lower unit oil for a boat? I found a service manual for a 1994 online (the link that was in one of the posts on this forum wasn't working but I found it elsewhere) and I figured it can't be THAT different from the 1995 one. I looked through the jet drive section and didn't see anything indicating how much or what type of oil to use. Anyone know what I should do?

    Thanks.

    John


  2. #2

    Join Date
    Jul 2008
    Location
    Orange County, NY
    Posts
    131
    OK. I found the capacity in the service manual (6oz.) and it says to use TS oil 0678-120. Is there any substitute for the OEM stuff? I don't have any AC dealers locally that I can go to, the closest one is a 35-40 minute drive so I'd like to use something else.

    Thanks.

    John

  3. #3
    Team RTYD burton9010's Avatar
    Join Date
    Apr 2008
    Location
    Sacramento CA
    Posts
    290

  4. #4
    If I recall, it should give the "standards" of the oil required.

  5. #5

    Join Date
    Jul 2008
    Location
    Orange County, NY
    Posts
    131
    What should?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Typical or Not? Oil in Supercharger Inlet
    By RGUN in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-10-2015, 10:43 AM
  2. Oil in pump conversion
    By GNX231 in forum 4-Tec Performance
    Replies: 3
    Last Post: 01-19-2014, 07:59 AM
  3. Oil in pump conversion
    By GNX231 in forum 4-Tec Performance
    Replies: 5
    Last Post: 01-17-2014, 07:45 AM
  4. Oil in supercharger inlet
    By hkallestad in forum 4-Tec Performance
    Replies: 24
    Last Post: 08-30-2012, 04:47 AM
  5. Oil in pump bearings?
    By r33pwrd in forum Yamaha PWC Performance (2-stroke)
    Replies: 31
    Last Post: 05-23-2006, 01:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •