06-25-2010, 04:32 AM #1
C1 Monster Charger Wheel on stock fuel system
Are fuel mods needed when installing the C1 wheel? Plan on using it at sea level. Has anyone used this setup without problems?
06-25-2010, 05:36 AM #2
06-25-2010, 06:09 AM #3
My opinion is LC-1's are cheap in the big picture.
Not a C-1 but the other day I took my C-3/R2/Riva FPR out the first time after making some changes and with the OEM settings on the Powershot I was 14.5 at WOT (8400 rpm). Moved the Powershot's red settings from 4/5 to 7/8 and I was at 11.4. Set Powershot at 7 and was dialed-in at 11.9-12.0.
Without the LC-1, I never would have known I was that lean.
06-25-2010, 06:32 AM #4
- Join Date
- May 2006
I am told you can run the c1 without the powershot. Does anyone know what boost you get c1 vs the c3 and difference in mph. in the 8400 rpm range
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jk in forum Sea Doo ClassifiedsReplies: 10Last Post: 05-11-2008, 11:29 AM
By rob1086 in forum 4-Tec PerformanceReplies: 39Last Post: 05-01-2008, 01:09 PM
By PiRiPi in forum Honda PerformanceReplies: 5Last Post: 01-24-2008, 08:17 PM
By FAST RXP in forum 4-Tec PerformanceReplies: 38Last Post: 12-05-2007, 09:31 PM
By Insanediego Joe in forum 4-Tec PerformanceReplies: 12Last Post: 07-18-2007, 02:27 PM