Results 1 to 5 of 5

Thread: Sank RXP 07

  1. #1
    Sturm215's Avatar
    Join Date
    May 2010
    Location
    Lakeland florida
    Posts
    1,893
    +1
    64

    Sank RXP 07

    I will probably needs some help with this so if anyone is in the central florida area.. would be greatly appreciated.... Ive been changing oil... hoping to clear out water.. seems endless...... it fired up for a lil while but it would stall again then I'd pull plugs and turn it over and water shoots out.... now it's completely dry in there and can't get it to fire at all...


  2. #2
    outboard john's Avatar
    Join Date
    Jun 2006
    Location
    Escondido, Ca.
    Posts
    474
    +1
    2
    Your entire intake from the air filter, to the super charger(external intercooler if you have one) to the intake minifold can hold water. Some guys on here have said that they had to undoo the intake manifold and tip it to get all the water out of it. If your sure that you have all the water out you might want to dribble some fuel into the cylinders and see if it will try and light for you.
    Good luck OBJ

  3. #3
    Sturm215's Avatar
    Join Date
    May 2010
    Location
    Lakeland florida
    Posts
    1,893
    +1
    64
    Yeah that sounds like a good idea.... I'm going to get some new spark plugs today... even though the ones I had look fine.... it doesn't even sound like it wants to fire.... real curious if any water is in my tank... it only takes a little I heard to settle at the bottom and the pump will draw just that ..... Thanks for the tip.

    Chad

  4. #4
    Duke's Avatar
    Join Date
    Jul 2006
    Location
    Florida
    Posts
    10,004
    +1
    406
    Unlikely that water is in tank, sealed pretty well.

    Need to remove intake manifold and drain completely. The can hold a gallon or more and will just puddle on the bottom until it fires off and flood the motor with water again. Either way it needs to be done ASAP before major cylinder damage occurs from the water.

    Is this boat stock?

  5. #5
    Sturm215's Avatar
    Join Date
    May 2010
    Location
    Lakeland florida
    Posts
    1,893
    +1
    64
    yeah this is stock.. do you have a right up off how to take it off ....... Seems quite complicated... jerry told me it's seven bolts which I found am I going to have to take the throttle body off and stuff before the manifold comes off completely?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. rxp 07
    By ashwells in forum 4-Tec Performance
    Replies: 3
    Last Post: 02-28-2010, 11:14 AM
  2. How to make my rxp 07 light wight?
    By ripspeed in forum 4-Tec Performance
    Replies: 16
    Last Post: 01-17-2010, 02:24 PM
  3. Sank RXP
    By applepower in forum Sea Doo Open Discussion
    Replies: 18
    Last Post: 06-12-2009, 03:33 AM
  4. Rxp 07 Questions!!
    By q8rxp in forum 4-Tec Performance
    Replies: 6
    Last Post: 10-19-2008, 08:55 PM
  5. need suggestions to modified my RXP 07
    By mr_magookw in forum 4-Tec Performance
    Replies: 2
    Last Post: 08-14-2007, 08:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •