Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    Enufpwr's Avatar
    Join Date
    May 2005
    Location
    Lake St. Clair, Michigan
    Posts
    446

    06+ to 08 4tec heads--- 4 sets- ported,complete with rockers, bare,

    Time to clear up the spare parts.

    I have left --- 1 valve cover left- $30 free shipping to 48 lower states.

    All heads have been sold

    SKU: 420613978 --- will fit model years 2003-2009 4tec engines including RXP,RXPX,RXT,RXTX, GTI.

    The part number is 420613978 which replaces 420613975 and 420613976 and retails for $843.99. This will fit all 2003-2009 4-tec powered PWC's.

    ----------------------------------------------------------------------------------------------------------------------
    Valve cover-- broken tab on one side. Cosmetic only--doesn't effect anything..see pictures.
    $30 or best offer shipped in US.
    ---------------------------------------------------------------------------------------------------------------------

    08 4tec head bare with no valves. Race gas head only. Head has been decked .70mm for 185lbs of compression when cam is retarded fully. Used for race gas only or you will need to rework the chambers to bring back to stock compression. Might require custom pistons or check valve relief clearance before use. Valve guides good, just head is decked to much to run pump gas. Use for core or moddify to work with your setup.
    $120 shipped in US or best offer.--- SOLD--
    ----------------------------------------------------------------------------------------------------------------------

    08 Complete 4 Tec head with stock valves, stock springs, rockers, camshaft #420837851, cam gear--ready to blot on. Head was taken off a 10 hour rxpx - valves are clean and almost new condition- no rust and polished. Mint condition. Springs have ~10 hours of use on them. Stored with fogging oil on springs and in chambers. Rockers, cam, cam gear are worth $300 alone if sold individually. Will refund if not happy.
    $550 shipped in US.---SOLD
    ----------------------------------------------------------------------------------------------------------------------
    08 Ported head with lightened stock valves, riva valve train, cam, rockers - $1100----SOLD
    ----------------------------------------------------------------------------------------------------------------------
    07 head with valves ready to bolt on. Taken from a 34 hour 07RXP. Valves are clean and almost new condition- no rust and polished.Springs have ~34hours of use on them. Stored with fogging oil on springs and in chambers. Will refund if not happy.
    $475 shipped in US. ----SOLD
    ----------------------------------------------------------------------------------------------------------------------

    Paypal accepted only.

    US only lower 48 states.... not including Puerto Rico.

    Trying to avoid shipping internationally since I got burned twice before and shipping charges, import duties, taxes, and shipping confirmation/delivery will make it not worth selling for that price.

    Post here or PM me if interested.

    Click on pictures to read discription. I tried to label each picture as best I could.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	08 cam.jpg 
Views:	53 
Size:	56.4 KB 
ID:	203884   Click image for larger version. 

Name:	08 chamber.jpg 
Views:	52 
Size:	45.4 KB 
ID:	203885   Click image for larger version. 

Name:	08 head complete.jpg 
Views:	50 
Size:	60.6 KB 
ID:	203886   Click image for larger version. 

Name:	4 heads.jpg 
Views:	62 
Size:	88.8 KB 
ID:	203887   Click image for larger version. 

Name:	4tec heads spare.jpg 
Views:	50 
Size:	95.9 KB 
ID:	203888   Click image for larger version. 

Name:	07 chamber#2.jpg 
Views:	47 
Size:	27.7 KB 
ID:	203889  

    Click image for larger version. 

Name:	07 clean chamber.jpg 
Views:	53 
Size:	53.8 KB 
ID:	203890   Click image for larger version. 

Name:	07 chamber.jpg 
Views:	50 
Size:	41.9 KB 
ID:	203891   Click image for larger version. 

Name:	08head 10 hours #2.jpg 
Views:	51 
Size:	64.1 KB 
ID:	203892   Click image for larger version. 

Name:	08 ported head.jpg 
Views:	49 
Size:	69.1 KB 
ID:	203893  
    Last edited by Enufpwr; 07-12-2010 at 10:31 PM. Reason: added info..sold ported head, Sold 07 head,Sold 08 and 08 race head


  2. #2
    Enufpwr's Avatar
    Join Date
    May 2005
    Location
    Lake St. Clair, Michigan
    Posts
    446

    more pics added

    Added more pics....
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	valve cover1.jpg 
Views:	43 
Size:	99.3 KB 
ID:	203896   Click image for larger version. 

Name:	valve cover3.jpg 
Views:	48 
Size:	74.5 KB 
ID:	203895   Click image for larger version. 

Name:	decked .70mm.jpg 
Views:	49 
Size:	76.2 KB 
ID:	203894   Click image for larger version. 

Name:	valve cover 2.jpg 
Views:	44 
Size:	73.8 KB 
ID:	203897   Click image for larger version. 

Name:	08 head-10hours.jpg 
Views:	43 
Size:	71.3 KB 
ID:	203898  

  3. #3
    Enufpwr's Avatar
    Join Date
    May 2005
    Location
    Lake St. Clair, Michigan
    Posts
    446
    TTT

  4. #4
    Enufpwr's Avatar
    Join Date
    May 2005
    Location
    Lake St. Clair, Michigan
    Posts
    446
    Sold three heads.

    Complete 08 RXPX head for sale $550----with new valves, rockers, cam, and timming gear. Will go up on Ebay next week if not sold here. ---Sold

    08 milled race head bare with no valves----SOLD.
    Valve cover for $30 left.
    Last edited by Enufpwr; 07-12-2010 at 10:32 PM. Reason: sold 08 head, and 08 race

  5. #5
    Enufpwr's Avatar
    Join Date
    May 2005
    Location
    Lake St. Clair, Michigan
    Posts
    446
    update....

    Sold 4 heads....

    Have the bare head that been milled for 185lbs compression left. (You can always redo the chambers if you want to go back to stock, but make sure your valve relief clearance is set and pistons valve relief is good before use).---SOLD

    Have the valve cover left for sale.

    Jim---your mail box is full, was trying to respond back to let you know that 08 head did sell. Thanks

  6. #6
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Thanks, I guess we don't get a PM box full warning anymore. At least I don't seem to see one on my screen anymore. Bummer about missing the head.

  7. #7
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Found the PM full warning. Its all the way down on the the PM page now. I usually don't go down to the bottom of the page. Would be nice if they put it back to the top of page. Learn something every day, I guess.

  8. #8
    Enufpwr's Avatar
    Join Date
    May 2005
    Location
    Lake St. Clair, Michigan
    Posts
    446
    Good to know.. I didn't see that at the bottom untill you mentioned it. This new update to the forum is tricky and might take some time to get used to.

    Ya, the guy just paid me earlier today for the 08 head. He had issues with this paypal account...switched bank accounts and needed to be verified again. So I gave him the weekend to pay otherwise I would have updated this post earlier. Sorry.

  9. #9
    Enufpwr's Avatar
    Join Date
    May 2005
    Location
    Lake St. Clair, Michigan
    Posts
    446
    added updated race head pics of cam area for potential buyer. Pending sale on 08 race head.---------SOLD
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC09530.jpg 
Views:	37 
Size:	77.3 KB 
ID:	204829   Click image for larger version. 

Name:	DSC09534.jpg 
Views:	37 
Size:	102.6 KB 
ID:	204830   Click image for larger version. 

Name:	DSC09527.jpg 
Views:	35 
Size:	52.3 KB 
ID:	204831   Click image for larger version. 

Name:	DSC09533.jpg 
Views:	26 
Size:	49.1 KB 
ID:	204832   Click image for larger version. 

Name:	DSC09531.jpg 
Views:	36 
Size:	101.3 KB 
ID:	204833   Click image for larger version. 

Name:	DSC09528.jpg 
Views:	38 
Size:	65.5 KB 
ID:	204834  

    Click image for larger version. 

Name:	DSC09532.jpg 
Views:	34 
Size:	66.5 KB 
ID:	204835  
    Last edited by Enufpwr; 07-12-2010 at 10:29 PM. Reason: Sold race head...

  10. #10

    Join Date
    Jun 2010
    Location
    Hampton, VA
    Posts
    52
    thanks daren

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts Heaps of rxp 06 to 08 parts
    By suba in forum Sea Doo Classifieds
    Replies: 18
    Last Post: 11-05-2016, 01:24 PM
  2. 06 to 08 driveshaft
    By monaroman76 in forum 4-Tec Performance
    Replies: 19
    Last Post: 01-03-2012, 02:32 AM
  3. 06 to 08 supercharger shaft install question
    By VMDAMT in forum 4-Tec Performance
    Replies: 7
    Last Post: 06-03-2011, 11:59 PM
  4. FS 06+ to 08 Crankshaft, balance shaft, cases for sale
    By Enufpwr in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 07-05-2010, 09:54 PM
  5. Seadoo 4-tec Cyl head complete with rockers
    By Green Hulk in forum eBay Finds
    Replies: 0
    Last Post: 11-26-2009, 11:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •