Hello, I have a 1995 Seadoo XP. We took it out on last weekend. It was running great. When we returned to shore we pulled the kill switch from the ignition to kill the motor and thin drifting on to shore. The Seadoo set for a few hours, when we were ready to ride again we place the kill switch back on and the motor would not even turn over. There was nothing but a silence. I pulled one of the plugs to test for firing and without any results. I checked them both with the same results as well. I opened the plastic coil housing and check for any blown fuses and founded none. I did not locate any worn or broken wires either. I ordered a new oil pressure sensor and ignition switch and installed them as well. Still no power to the plugs. Does anyone have any ideas please. Thank you so much, Michael