Thread: Fuji Flywheel Questions
07-06-2010, 07:02 PM #1
Fuji Flywheel Questions
I have pictures here of two different fly wheels from two Fuji engines of different years and sizes. Both engines have the same timing at 3000 rpm, 24*. Both flywheels pictured have the keyways lined up exactly. My question is why don't the magnetic trigger blocks line up? Why does the bottom flywheel have a longer trigger block? My last question, why does the bottom flywheel have the extra, small trigger block and in only the one spot? I know that "trigger block" probably isn't the correct terminology but I think you get the picture.
Thank you, Clayton G
07-06-2010, 07:13 PM #2
- Join Date
- May 2008
The top one with the smaller blocks is for a analog CDI, the one on the bottom is for a digital CDI.
The one on the top is from 93 or 94 and earlier, the one below is from 95ish and on... Theyre not interchangeable.
07-06-2010, 07:21 PM #3
So if I were to use a CDI box from a 96 SLX 780 I would need the flywheel from the 96 SLX 780 also?
07-06-2010, 11:30 PM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ph2ocraft in forum Polaris Tech Tips and InfoReplies: 13Last Post: 04-29-2011, 12:03 AM
By 1996SLTX in forum Polaris Open DiscussionReplies: 1Last Post: 11-06-2007, 12:34 AM
By Rodneyae in forum Polaris Open DiscussionReplies: 4Last Post: 05-16-2007, 05:20 AM
By ZMANN in forum Polaris PWC PerformanceReplies: 3Last Post: 12-14-2006, 07:50 PM
By ZMANN in forum Polaris PWC PerformanceReplies: 12Last Post: 12-13-2006, 01:03 PM