Results 1 to 6 of 6

Thread: SC Slip

  1. #1

    Join Date
    May 2010
    Location
    Salem, Ohio
    Posts
    51

    SC Slip

    First off, i'm a newb. I have an '07 RXT with the mods below. it currently has 60 hours on it. Can some explain to me exactly what slip is, how to check it, and what my slip should be? I have searched this but I don't understand.


  2. #2
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673

  3. #3
    Swedish Viking Craigo's Avatar
    Join Date
    Jun 2008
    Location
    Seattle
    Posts
    1,367
    +1
    62

    Shimming your clutches to increase the slip moment of your charger.

    The tension on the supercharger clutch is set - so the shaft disengages from it's power source when there is an abrupt drop in RPMs - "when you let off the throttle (for example) ". If the cluch is slipping too much you won't get as much boost and you may damage the clutch washers. Therefore, it is highly recommended to periodically check and correct the slip moment of the clutch assembly. The instructions are all over this site and in the service manual...

    Read the service manual, to check your slip moment, and use Shims or Mcmaster washers to increase your slip moment, if it's too low! Shimming Instructions >>> CLICK <<<

    Or just send your charger to Jerry.

  4. #4

    Join Date
    May 2010
    Location
    Salem, Ohio
    Posts
    51
    i don't have a service manual... can it be found online?

  5. #5
    Swedish Viking Craigo's Avatar
    Join Date
    Jun 2008
    Location
    Seattle
    Posts
    1,367
    +1
    62
    Yes, Ebay has them >>> CLICK <<<

  6. #6

    Join Date
    May 2010
    Location
    Salem, Ohio
    Posts
    51
    Thanks!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Is it SC slipping?
    By FreakRXP1200 in forum 4-Tec Performance
    Replies: 1
    Last Post: 04-30-2009, 11:33 PM
  2. is this normal? or sc slipping? rxt-x
    By Pooper_Scooper in forum 4-Tec Performance
    Replies: 6
    Last Post: 02-28-2009, 09:47 AM
  3. SC Slip Moment?
    By aha in forum 4-Tec Performance
    Replies: 10
    Last Post: 02-26-2009, 06:07 PM
  4. RXP215 SC Slip Immediate after Riva Washer Install
    By OffShore2 in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-17-2008, 09:12 AM
  5. Stage 3 sc slip moment
    By jimjim in forum 4-Tec Performance
    Replies: 5
    Last Post: 01-15-2008, 06:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •