Results 1 to 6 of 6
  1. #1

    Join Date
    Jun 2010
    Location
    Atlanta Ga.
    Posts
    22

    Question Exhaust chamber Manifold Bolt Problem 2001 GPR 1200

    Has anyone got the combination to getting the bolt closest to the hull Torqued ?
    This is the bolt against the left side closest to the hull with the recessed cruve on the chamber at manifold gasket .

    I have just started wrenching

    could not get ratchet between hull & Recess when removing, had to use breaker bar for clearence

    also this is my 1st post , Hope it is being done correctly


  2. #2
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Welcome to the Hulk.

    I use a swivel joint on the ratchet.

    Name:  G_30954G_CL_1.jpg
Views: 114
Size:  1.9 KB

  3. #3

    Join Date
    Jun 2010
    Location
    Atlanta Ga.
    Posts
    22
    will this not change the actual torque from the torque wrench?

    Thanks for your input

  4. #4
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Not enough to worry about.

  5. #5

    Join Date
    Jun 2010
    Location
    Atlanta Ga.
    Posts
    22
    Thanks

    Beerdart

    I have been reading fourm since mid June
    and I can say I have learned more about my skis in that short time
    than I have in the 9 years I have been putting them in & out of the shop

    this is the neatest thing since spilt milk

    Thanks again for all the info everyone has posted

  6. #6
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    Pay It forward that is what makes any forum work.
    Quote Originally Posted by ALL MY DOE View Post
    Thanks

    Beerdart

    I have been reading fourm since mid June
    and I can say I have learned more about my skis in that short time
    than I have in the 9 years I have been putting them in & out of the shop

    this is the neatest thing since spilt milk

    Thanks again for all the info everyone has posted

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2001 Virage TX Exhaust lower mounting bolt problem
    By skiversinc in forum Polaris Tech Tips and Info
    Replies: 2
    Last Post: 06-07-2016, 10:54 AM
  2. 2001 GPR 1200 Starting Problems?
    By DEROBE16 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-04-2013, 09:33 PM
  3. Riva gas Power Valve Question 2001 gpr 1200
    By patrick webb in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 07-19-2009, 12:40 AM
  4. 2001 GPR 1200 hull FS
    By itzmunch in forum Yamaha Classifieds
    Replies: 4
    Last Post: 07-26-2008, 10:25 PM
  5. 2001 gpr 1200 pump
    By daddyville in forum Yamaha Classifieds
    Replies: 3
    Last Post: 06-24-2008, 08:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •