Results 1 to 5 of 5
  1. #1
    SJ-(KY)'s Avatar
    Join Date
    Jul 2007
    Location
    Forest Hills,KY
    Posts
    278
    +1
    4

    Can somone help me with the water line routing with Coffman Tripple Pipes..

    Ok I figured it was time to step up a little so im installing a set of Coffman tripple pipes off my other Ultra... Theres 4 90 degree fittings off each pipe... Can someone please help me find a diagram or explain what each fitting does or where they go would be great... Any info would be gladly appreciated...


  2. #2
    btldigger's Avatar
    Join Date
    Feb 2007
    Location
    lebanon tn.
    Posts
    1,641
    Something dont sound rite. My pipes have 3 fittings. The way they are routed is Water exits the head then goes into the pipe on the cylinder end
    it exits toward the stinger end and out the pissers. There is a smaller 90 on the stinger to inject water. I use a line from my pump to feed a jetworks valve then
    into a manifold with 3 outputs to each stinger.

    Are you sure those are not factory pipe tripples.

  3. #3
    SJ-(KY)'s Avatar
    Join Date
    Jul 2007
    Location
    Forest Hills,KY
    Posts
    278
    +1
    4
    Yeah there definatly coffmans.... I'll run outside to the garage an snap a picture at some point today.. When I bought the ski Kerry was running his own water injection with a solenoid to give it some balls down low so maybe thats what the extra fittings for? Its just been so long im unsure what happend to my diagrams I made when I pulled the ski apart :-/... So what your say on your pipes with 3 fittings: water runs from heads in to the first fitting.. After that water runs threw the pipe to the next fitting towards the end of the stinger which runs to my pissers.. The last fitting at the main bottom is fed from the pump that goes to the water log? If I havent mentioned it before Thanks a bunch for the help you an jonny have gave me threw my progression with this ski the last month 1/2...

  4. #4
    Fat Man, Little Boat Region8Ultra250X's Avatar
    Join Date
    Jun 2007
    Location
    Jersey
    Posts
    5,563
    +1
    169

  5. #5
    SJ-(KY)'s Avatar
    Join Date
    Jul 2007
    Location
    Forest Hills,KY
    Posts
    278
    +1
    4
    Thanks for the link Ultra250x..... Seems weird that there connecting 2nd an 3rd fittings together with a water line.....

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. can someone help me with where these two fuel lines go on my ZXI?
    By chvscks319 in forum Kawasaki How To & FAQs
    Replies: 2
    Last Post: 06-17-2011, 08:49 AM
  2. Can somebody help me with what this is on my leg.
    By HallPass in forum Open Discussion
    Replies: 76
    Last Post: 01-09-2009, 08:07 AM
  3. Can Someone Help Me With Oem 1200 Carbs?
    By JeffSki in forum Kawasaki How To & FAQs
    Replies: 2
    Last Post: 01-16-2008, 05:07 PM
  4. Can anyone help me with my impeller shaft and new prop?
    By ccassone in forum 2-Stroke Performance
    Replies: 0
    Last Post: 02-10-2006, 03:45 PM
  5. Can someone help me with Japanese?
    By Pistonwash in forum Yamaha PWC Performance (2-stroke)
    Replies: 19
    Last Post: 12-25-2005, 09:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •