07-15-2010, 03:50 AM #1
- Join Date
- Aug 2009
I recently installed the upgrade stator kit. before the upgrade, the mfd was working. after the install and during the test, the mfd doesnt come on.
07-15-2010, 06:21 AM #2
- Join Date
- Jul 2007
- near Toronto, Canada
What year and model PWC?
Check or replace the MFD 1/4 Amp fuse. Only replace with another 1/4 Amp fuse.
If MFD works when buttons are pressed, but not when engine is started;
Disconnect and check the Yellow to Red/Purple coil ohms, and the connections.
Yellow should have battery voltage when engine is not running. Yellow is also the RPM feed to the MFD.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ph2ocraft in forum Polaris Open DiscussionReplies: 14Last Post: 05-05-2012, 07:02 PM
By Neal Van in forum Polaris Open DiscussionReplies: 1Last Post: 07-22-2007, 09:31 AM
By andy95'slx780 in forum Polaris PWC PerformanceReplies: 12Last Post: 03-21-2007, 09:13 PM
By ph2ocraft in forum Polaris Open DiscussionReplies: 5Last Post: 02-20-2007, 11:41 PM
By xlint89 in forum Polaris PWC PerformanceReplies: 4Last Post: 12-13-2006, 11:42 PM