07-15-2010, 01:13 PM #1
Rebuild stock SC or install X charger ?
06 RXT 45 hrs, minus one ceramic washer. Been checking into what to do, rebuild or replace to X charger. Is there a complete x charger or do you just use your stock SC and then add X impeller and front housing ? Wheres the best place to buy ?
07-15-2010, 02:47 PM #2
IMO for about $300 more than a rebuild go with the X charger and get it here - http://www.4-tecperformance.com/inde..._cart&sort=20a
You're going to need to add 42 injectors and you don't have to have it but add either a 3" or 4" intake
07-15-2010, 03:16 PM #3
for the upgrade to the xcharger u need 42 inje 3 to 4 inch intake and most inportant a intercooler dont recomend using a x charger with out a intercooler
07-15-2010, 03:31 PM #4
07-15-2010, 03:49 PM #5
07-15-2010, 04:18 PM #6
You dont HAVE to run an external IC with the X charger. It has been run with stock IC by quite a few guys on this board before with no problems. Now to maximize the potential of that charger one SHOULD get an external IC.
07-15-2010, 04:56 PM #7
- Join Date
- Jul 2007
- Montgomery, AL
All you need is riva metal washers, needle bearings, new spring washers, and maybe a shim or two. Set slip to 110 in/lbs and you are good. Click on link for online store at top of page. get spring washers and needle bearings from oem parts and metal washers and shims from performance section and you will be up and running for around $150. that is if the shaft is not dammaged. Give it a good look and if there is no visable dammage this should fix you up.
07-15-2010, 05:48 PM #8
07-15-2010, 06:15 PM #9
you will be very happy if you up grade to a x charger
07-15-2010, 06:49 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By vxrpete8 in forum Sea Doo ClassifiedsReplies: 12Last Post: 07-05-2008, 04:07 PM
By vxrpete8 in forum Sea Doo ClassifiedsReplies: 0Last Post: 05-03-2008, 08:00 AM
By NoMo-xp4me in forum 4-Tec PerformanceReplies: 14Last Post: 01-17-2008, 12:06 PM
By ssvincels1 in forum 4-Tec PerformanceReplies: 2Last Post: 09-16-2007, 05:13 PM
By HOSS in forum 4-Tec PerformanceReplies: 0Last Post: 11-24-2006, 09:44 PM