Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15
  1. #1
    mstennes's Avatar
    Join Date
    Jul 2006
    Location
    On the Columbia River above a Dam
    Posts
    843
    +1
    1

    What mods to run a mini Rude on a X oat?

    I'm curious here on what mods need to be done to run a Mini Rude on my 08 RXPX?
    Thanks


  2. #2
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    Quote Originally Posted by mstennes View Post
    I'm curious here on what mods need to be done to run a Mini Rude on my 08 RXPX?
    Thanks
    Personally I would do 48's with an RRFPR. You may be ok with stock injectors and an RRFPR with the stock ECU though.

  3. #3
    V-Tec, 4-Tech that's how I roll meirvin's Avatar
    Join Date
    Feb 2006
    Location
    Dallas/Ft Worth, Tx
    Posts
    1,514
    +1
    3
    so no way without the RRFPR

  4. #4
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    Sure you could do it but I think most people would agree that you will probably be a tad lean on top.

  5. #5

    Join Date
    Mar 2009
    Location
    Tahiti
    Posts
    93
    Quote Originally Posted by Ocman View Post
    Sure you could do it but I think most people would agree that you will probably be a tad lean on top.
    What about running it with 50's? I am also interested to put a mini rude on my 08 T-X.

  6. #6
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    Quote Originally Posted by haapiti007 View Post
    What about running it with 50's? I am also interested to put a mini rude on my 08 T-X.
    I learned from everyone else here bro, in order not to fry the motor when you crank the boost up you need to run them a bit on the rich side WOT. The only way to be sure of this is an RRFPR and a way to monitor your AFR's LC1/LM1 etc. These skis are VERY expensive so take care of the engines.

    If it were me I would run 48's with RRFPR along with and LC1. Just Saying...

  7. #7

    Join Date
    Mar 2009
    Location
    Tahiti
    Posts
    93
    Well, i already installed a stage 1 + the x upgrade sc and i am still thinking either upgrade the SC or put the riva ECU.
    I am still undecided which way is better to take. Riva ecu or mini rude?

    Jerry told me that for the mini rude, using 50lbs injectors and a rrfrp set at 56 psi will be fine to run it correctly so i would not need a LC1 to measure AFR.

    I am being careful cuz i already blew my engine once.

  8. #8
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    when you order it... ask jerry what is needed...he knows exaclty what you need... i just dont know what is right ...i have seen so may different things on that set up...

    stock injectors with just a rrpfr ???

    just add 48...and it will be a little rich off boost???

    it is only a couple pounds more...fueling needs shouldnt be that different..

    my personal thoughts is the stock 42 and a rrfpr should take care of it
    ..the rrfpr is probably the best way ...keeping the lower end from being rich ...as long as the top end doesnt max the injectors out..

    you are at the point you need to get a af meter

  9. #9
    Eric Ocman's Avatar
    Join Date
    Aug 2008
    Location
    Cataula, Georgia, United States
    Posts
    4,700
    +1
    77
    The RIVA Ecu will do more for you I can pretty much guarantee that. When I dropped mine in I was like Holy ****

  10. #10

    Join Date
    Mar 2009
    Location
    Tahiti
    Posts
    93
    Thanks Ocman!
    Did you have to depitch your 15/22 to dial in your rpm to 8550 rpm after installing the riva ecu?
    I feel like the riva ecu would be the safest way to get more power as i already put 50lbs injectors and riva x upgrade sc so i won't have to deal with afr and rrfrp.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What impeller to run with mods on a 04 RXP
    By FPV TRANNY in forum 4-Tec Performance
    Replies: 8
    Last Post: 03-27-2015, 08:09 PM
  2. what do i need to run a x charger on an 07 rxp stock ecu?
    By bksbigboy69 in forum 4-Tec Performance
    Replies: 3
    Last Post: 07-27-2011, 09:09 AM
  3. Please help clarify whats required to run a rude 3
    By Insanediego Joe in forum 4-Tec Performance
    Replies: 5
    Last Post: 03-21-2010, 11:09 AM
  4. Need advice on what prop to run on my rxp-x
    By TDSTYG in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-19-2009, 06:05 PM
  5. Whats needed to run a Rude?
    By Gus13letter in forum 4-Tec Performance
    Replies: 14
    Last Post: 02-19-2009, 10:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •