Results 1 to 3 of 3

Thread: splitting cases

  1. #1

    Join Date
    May 2009
    Harrisonville mo

    splitting cases

    got a 2001 1200 and trying to get the cases apart with out breaking something.
    any ideas the silcone has them glued together?? used rubber mallets no luck
    the manuals said to tap on the case tried that no luck, I am trying to leave the top end together just need to put in new pto seals,

  2. #2

    Join Date
    Aug 2006
    Homer Glen Il.
    you have to remove the cylinder base nuts as the studs go all the way through

  3. #3

    Join Date
    Sep 2006
    ya the cly base nuts need to be takeing off and the 6 bolts and the 2 bolts at the seal , the cases need to split to take the cases apart to change the seal but you will need to clean and prep the case 1/2's for new case sealent , which is almost damn near a new rebuild

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Methods for removing the coupler from engine to split cases
    By JoeyDFZS in forum Yamaha PWC Performance (4-stroke)
    Replies: 20
    Last Post: 10-17-2014, 08:30 AM
  2. do i need to split cases in polaris slt 750 with hole in first piston
    By Bmwcrazyman in forum Polaris Open Discussion
    Replies: 4
    Last Post: 06-03-2013, 07:50 AM
  3. How to ship non-split casing/crank
    By YamahaPat in forum Yamaha Open Discussion
    Replies: 9
    Last Post: 09-24-2009, 06:17 PM
  4. split cases on slt700, rough inner bearings, what to do?
    By Texwing in forum Polaris Open Discussion
    Replies: 10
    Last Post: 09-03-2009, 10:16 AM
  5. Tips on Splitting the case...
    By YJSONLY in forum 4-Tec Performance
    Replies: 13
    Last Post: 03-03-2008, 09:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts