Thread: What's this broken wire for?
07-24-2010, 05:15 PM #1
07-24-2010, 09:22 PM #2
- Join Date
- Jul 2007
- near Toronto, Canada
That would be the Black ground wire for the magneto stator.
Clean it up and splice it back together with a heat shrink sealing butt connector.
07-30-2010, 02:37 PM #3
Thanks K447 - I had to cut out about four inches of badly corroded wire and patch up with copper wire. I soldered the two together and shrink wrapped both connections with heat gun. So all is good. Just out of curriosity what would happen if this wire wasn't connected properly?
07-30-2010, 02:55 PM #4
run like crap if at all. that is the ground (return) from the stator /charger back to the ebox. looks like it was flappi9ng around and got rubbed by the drive shaft. Zip tie it up somewhere out of the way
07-30-2010, 02:58 PM #5
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Romeo in forum Polaris How To & FAQsReplies: 21Last Post: 04-07-2008, 12:10 PM
By don jordan in forum Yamaha Open DiscussionReplies: 3Last Post: 03-30-2008, 05:55 PM
By Lurker in forum 4-Tec PerformanceReplies: 3Last Post: 03-21-2008, 09:10 PM
By nitro rxp in forum 4-Tec PerformanceReplies: 4Last Post: 03-10-2008, 06:27 PM
By lafjax in forum Sea Doo Open DiscussionReplies: 9Last Post: 05-20-2007, 11:11 PM