Results 1 to 8 of 8
  1. #1
    2blue's Avatar
    Join Date
    Oct 2008
    Location
    Vancouver Canada
    Posts
    220

    94 Seadoo XP -had a couple questions

    Question #1

    I recently bought 94 seadoo xp 657 which is near mint.

    Today the trim stopped going down. Works fine going up!

    Checked all connections which we all good.

    Unplugged vts motor from wiring harness and gave it a 12v and it works. Flip the wires the other way around and it works up and down.

    Pulled a part vts/stop switch and all 3 buttons click and look in perfect condition.

    Opened Mpem which microfishe as far as i could see said 2 fuses) I found 3 fuses. All were good.

    It must be the switch correct?

    Question #2

    Does anythone have a picture of the mag with the case off? After working trying to get at the MPEM box and it being so tight in there i want to relocate it to the front of the boat so if i have these problems again i wont waist time trying to get my hands beat up. Has anyone done this before?

    Thanks for your help!!!


  2. #2
    RumRunnerRon's Avatar
    Join Date
    Mar 2010
    Location
    Portland, Oregon
    Posts
    462
    you could have a relay in the vts module going out. check out this web page. http://www.sea-doo.net/techarticles/vts/index.html

  3. #3
    2blue's Avatar
    Join Date
    Oct 2008
    Location
    Vancouver Canada
    Posts
    220
    Reading now. Thanks

  4. #4
    2blue's Avatar
    Join Date
    Oct 2008
    Location
    Vancouver Canada
    Posts
    220
    Well im not a electrical guru..... These relys are built within the module?

  5. #5
    RumRunnerRon's Avatar
    Join Date
    Mar 2010
    Location
    Portland, Oregon
    Posts
    462
    Yes that would be true. They are encapsulated in a potting material. A few guys have developed a work around fix by wiring in their own relays but the limit switches and gauge do not work. You do use the factory switch.

  6. #6
    2blue's Avatar
    Join Date
    Oct 2008
    Location
    Vancouver Canada
    Posts
    220
    The vts module seems to be hard to find brand new.

  7. #7
    RumRunnerRon's Avatar
    Join Date
    Mar 2010
    Location
    Portland, Oregon
    Posts
    462
    Quote Originally Posted by 2blue View Post
    The vts module seems to be hard to find brand new.
    Well it is a 94. I would ask around and see if it is the same as the 95 vts module on the xp. Parker Yamaha sell the one for the 95 with 720 and a 787. You may even think about trying Seadoosource. I think, if his list of used parts is current, he has one for 40+ship.

    http://www.parkeryamaha.com/seadoovtshousingmodule.aspx

    http://www.seadoosource.com/usedparts.html

  8. #8
    2blue's Avatar
    Join Date
    Oct 2008
    Location
    Vancouver Canada
    Posts
    220
    Shit! I screwed up my machine is 1993 not 1994. Hope that doesn't matter. I pulled out all the electrical today and will look into these parts THANKS!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 94 Seadoo XP Bogging down at 3000 rpm
    By mr3arnest in forum 2-Stroke Performance
    Replies: 1
    Last Post: 07-10-2010, 02:14 PM
  2. engine swap on a 94 seadoo xp
    By GP1300r rob in forum 2-Stroke Performance
    Replies: 1
    Last Post: 04-12-2009, 11:02 AM
  3. F/S 96 waveraider 1100 & 94 seadoo xp 650
    By johnson7454 in forum Yamaha 2 Stroke Skis
    Replies: 3
    Last Post: 09-30-2008, 06:45 PM
  4. 94 seadoo xp 650 pump housing
    By johnson7454 in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 09-14-2008, 01:27 PM
  5. 94 seadoo xp 650
    By johnson7454 in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 09-02-2008, 06:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •