Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20
  1. #1

    Join Date
    May 2009
    Location
    Miami, Florida, United States
    Posts
    306
    +1
    4

    Am I missing something?

    on the RIVA innercooler.. it calls for adding a new pisser under the seat..and running new lines all the way up to innercooler? why didn't they just use the stock pisser out the side ????


  2. #2
    SHOBiz's Avatar
    Join Date
    Jul 2008
    Location
    Wylie, Texas
    Posts
    3,577
    If I remember correctly that back pisser is to let out water when the pressure gets to a certain point so there is not too much water going through the IC. This helps maintain a transfer or heat to the water.

  3. #3
    David 1 FAST VE's Avatar
    Join Date
    Jun 2005
    Location
    Southaven, MS
    Posts
    1,958
    +1
    1
    The one on the side is 1/2 the size of the new one. I suppose you could drill the existing hole a tad bigger and put the supplied fitting there?


    Sent from my iPhone using Tapatalk

  4. #4
    Bounty Hunter Carlos Thomas's Avatar
    Join Date
    Jul 2007
    Location
    San Leandro, CA
    Posts
    1,401
    +1
    22
    I used the one on the side. I believe Jerry did the same.

  5. #5
    Awamori's Avatar
    Join Date
    Aug 2008
    Location
    Okinawa Japan
    Posts
    275
    +1
    1
    I also used the one on the side but used the pisser from the supplied kit. It sure looks like Jerry used the one on the side also from his avatar the way the water is shooting out the side.

  6. #6

    Join Date
    May 2009
    Location
    Miami, Florida, United States
    Posts
    306
    +1
    4
    figures.. my luck.. guess I should have asked BEFORE i drilled the rear hole..
    WELL anyone got any Idea for the rear hole now?

  7. #7
    lets race.... mikeFZR's Avatar
    Join Date
    Mar 2009
    Location
    MA
    Posts
    4,134
    +1
    205
    Quote Originally Posted by flkeyzgp1300r View Post
    figures.. my luck.. guess I should have asked BEFORE i drilled the rear hole..
    WELL anyone got any Idea for the rear hole now?
    Someone moved the flush line to the back of the ski. Looked pretty cool.

  8. #8
    Taking money away from the Z06 Fund
    Join Date
    Sep 2007
    Location
    Gainesville, VA
    Posts
    560
    +1
    1
    Quote Originally Posted by Carlos Thomas View Post
    I used the one on the side. I believe Jerry did the same.
    +1. I am also using the stock IC outlet "pisser" on the right side for the Riva IC outlet. Diameter is slightly smaller on the fitting, but flow is solid and I haven't noticed any heat fade whatsoever. Jerry is using the stock outlet on the side like others have said. I am using the new 1/2" Riva hose but still using the stock fitting. Seems to work fine for me. I couldn't see why Riva wants you to run the 7' hose all the way to the back just for a slightly larger outlet fitting, just me though.

  9. #9
    Awamori's Avatar
    Join Date
    Aug 2008
    Location
    Okinawa Japan
    Posts
    275
    +1
    1
    Why not use the stock hole with the Riva supplied pisser to let that baby flow?

  10. #10
    Taking money away from the Z06 Fund
    Join Date
    Sep 2007
    Location
    Gainesville, VA
    Posts
    560
    +1
    1
    Quote Originally Posted by Awamori View Post
    Why not use the stock hole with the Riva supplied pisser to let that baby flow?
    How did you get the Nut tight on the Riva pisser through the stock hole? The stock pisser uses the nut on the outside, so it's easy to tighten. The Riva one tightens from the inside, so how did you get it tight through the stock hole? Maybe I missed something when I tried doing it

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. am i missing something or is he?
    By actis in forum 4-Tec Performance
    Replies: 6
    Last Post: 06-12-2013, 04:12 PM
  2. IC question, am I missing something?
    By "NO SHOW" in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-09-2012, 11:20 AM
  3. Am I missing something here? Low
    By SkiBoy720 in forum Yamaha PWC Performance (2-stroke)
    Replies: 25
    Last Post: 05-08-2012, 12:20 PM
  4. am i missing something
    By weezzell5400 in forum Polaris Open Discussion
    Replies: 7
    Last Post: 05-18-2011, 12:20 PM
  5. Am I missing something here?
    By Tony in forum Polaris Open Discussion
    Replies: 7
    Last Post: 07-19-2007, 11:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •