Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15
  1. #1

    *5 degree pump nozzle*

    Looking for a 5 degree pump nozzle that will fit my 99 xl 1200. I would prefer one that has been drilled and tapped for reverse but will take one that's not. Pm me if u have something or know someone that has one.


  2. #2
    KamikazeGPR's Avatar
    Join Date
    Mar 2007
    Location
    Philadelphia
    Posts
    1,361
    +1
    99
    I have the stock 85MM, 5* nozzle off my 03 1300. It's untouched, still has siphon tube and visibility spout nipple. never been ground down for high angle plate. It's been sitting in my basement for 6 years. I used an R&D 87mm nozzle on my 1300. $70/shipped

  3. #3

  4. #4
    smacota1's Avatar
    Join Date
    Sep 2009
    Location
    South of Mason Dixon
    Posts
    1,162
    +1
    36
    I don't know if this is what you are looking for but I have one that is marked 60E and it has the holes tapped for reverse bucket.

  5. #5
    MR-1 X 2's Avatar
    Join Date
    Feb 2007
    Location
    Rancho Santa Margarita, CA
    Posts
    399
    +1
    5
    60E is usually the model designation for the FX series of skis/engines like 66v is for the GPR/XLT. That would make sense why it has a reverse bucket on it. I am not sure of the outlet OD or angle without checking one of our skis.

    Scott

  6. #6
    Bump Still needing one.

  7. #7

  8. #8
    60% of the time, it works every time.
    Join Date
    Oct 2009
    Location
    Green Cove Springs Florida
    Posts
    508
    Bump for you, just did mine, drilling for the reverse gate is super simple. you'll need a 5.2mm drill bit and an m-6 tap.
    Click image for larger version. 

Name:	reversegate.jpg 
Views:	71 
Size:	138.2 KB 
ID:	216838

  9. #9
    I have been searching for a while now and cant seem to find one yet.

  10. #10
    L Carlson's Avatar
    Join Date
    Aug 2007
    Location
    Bonita Springs, Florida, United States
    Posts
    7,118
    +1
    2
    Quote Originally Posted by upgraded View Post
    Bump for you, just did mine, drilling for the reverse gate is super simple. you'll need a 5.2mm drill bit and an m-6 tap.
    Click image for larger version. 

Name:	reversegate.jpg 
Views:	71 
Size:	138.2 KB 
ID:	216838
    Nice Job Jody! I'm still holding on 2 my 2

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 3 degree pump nozzle for VXR?
    By tchies in forum Yamaha PWC Performance (4-stroke)
    Replies: 13
    Last Post: 02-06-2014, 10:08 AM
  2. SOLD 87mm 5 degree pump nozzle**SOLD**
    By pokplalya22 in forum Yamaha Classifieds
    Replies: 5
    Last Post: 05-11-2013, 02:12 PM
  3. WTB 0 degree exit nozzle for a yamaha pump for a fz/sho/gpr, etc..
    By 305coco in forum Yamaha Classifieds
    Replies: 11
    Last Post: 03-28-2013, 04:48 PM
  4. GP 1200 5 degree pump nozzle part #?
    By silver93t in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 07-05-2012, 08:51 PM
  5. FS SHO Pump Nozzle - 83 mm - modified to be on a 6 Degree angle
    By philip_gpr in forum Yamaha Classifieds
    Replies: 1
    Last Post: 09-11-2010, 08:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •