08-05-2010, 07:12 PM #1
Steering HELP! Not going straight!!!
I have had a my 03 GP1300R for about a month. Each time I have had it out to the lake I have noticed that I have to turn my handlebars to the right to get it to go straight. I have measured back at the nozzle to make sure that is the same both left and right and it is, is this a sign of a really misaligned ride plate???? It still has the stock plate but anything is possible.
08-05-2010, 08:12 PM #2
Welcome to GH. The back nozzle might be straight but the bars are out! Get the nozzle straight with your caliper, then sit on the ski and look at the bars.
08-07-2010, 11:59 AM #3
08-07-2010, 03:40 PM #4
Get the bars straight first, then adjust the nozzle.
08-07-2010, 03:48 PM #5
- Join Date
- Aug 2010
I am also new to this site. I don't know much about your jetski but I do know that my gp1200 is doing the same thing. I figured out that hte problem is caused by the right trim tab being ripped/broken off.
If your ski is missing one of the trim tabs that could be the same problem. I would give it a look
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By FlSpearhunter in forum Polaris PWC PerformanceReplies: 8Last Post: 05-09-2008, 06:23 AM
By Avion3333 in forum Kawasaki PWC Performance (4-stroke)Replies: 3Last Post: 04-12-2008, 09:23 PM
By turboAD in forum Kawasaki PWC Performance (4-stroke)Replies: 10Last Post: 03-14-2008, 04:18 PM
By 345 Yamaha Killa in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 02-17-2008, 01:25 PM
By MONKEY in forum 4-Tec PerformanceReplies: 8Last Post: 01-05-2008, 03:09 PM