Thread: putting a LEO'S PUMP WEDGE
08-05-2010, 08:26 PM #1
putting a LEO'S PUMP WEDGE
I going to put the leo pump wedge on my ski that is a gp1300r, but i still have the 1200r pump. Today i unscrewed but when i did, i felt like the bolt have some torque please tell me when i going to put the pump back together if i need to torque the 4 bolts that i mark in the photo. please some help in this.
08-05-2010, 08:43 PM #2
Um, i see 1 arrow on a bolt but the other 2 arrows have me completly lost. You have to tighten the 4 bolts that hold the nozzle on. You also have to align the nozzle with the pump, there are no locating pins there with the wedge. You have to re-align the trim/steering cables.
08-05-2010, 08:55 PM #3
yeah but i have to torque the bolts and if so how many lb on torque do i need to do
08-05-2010, 09:04 PM #4
- Join Date
- Feb 2009
- Sacramento, CA
If you check out cajundudes site i think it is 12 or 14 ft lbs....
08-05-2010, 09:23 PM #5
08-05-2010, 09:27 PM #6
Do a Search on the thread instructions leo's wedge, I have posted instructions on adjusting the nozzle for center and trim.
M10 bolts are usually 28 ft. lbs.
08-06-2010, 08:30 AM #7
- Join Date
- Oct 2005
the pump bolts on the 1300 are 29 foot pounds. do it in 2 stages. 15 foot pounds, then go to 29. clean all threads and threaded holes. apply some type of thread sealer...
08-06-2010, 06:09 PM #8
thank andy but my pump is a 1200r the short pump does the 29 foot pounds it work in my pump?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By hydrojunkie in forum Yamaha PWC Performance (2-stroke)Replies: 21Last Post: 05-05-2008, 11:28 AM
By grifter in forum Polaris How To & FAQsReplies: 3Last Post: 06-21-2007, 01:36 PM
By mboley in forum Polaris Open DiscussionReplies: 2Last Post: 04-19-2007, 11:37 AM
By rapidacceleration in forum 4-Tec PerformanceReplies: 21Last Post: 10-06-2006, 06:22 AM
By Chezzy in forum Yamaha PWC Performance (2-stroke)Replies: 12Last Post: 07-07-2006, 07:45 AM