Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3

    Where to get 3/4" thru hull fitting?

    I'm looking for a 3/4" thru hull fitting so I can connect hose from my pump to the JD intercooler. I have looked everywhere but can't find any. Let me know if you know of any.


  2. #2
    Crash Test Dummy Smitty's Avatar
    Join Date
    Jun 2006
    Location
    Cullman, AL
    Posts
    1,280
    +1
    2
    $12 on Amazon.com.
    http://www.amazon.com/Attwood-Corpor.../dp/B0017QX95E

    Google is a wonderful thing, man. Learn it, live it, love it.

  3. #3
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3
    I should have specified that I don't want plastic. Sorry about that. I spent lots of time on google to no avail. I found the same one that you posted.

  4. #4
    gmoeller's Avatar
    Join Date
    Nov 2007
    Location
    Hermosa Beach, Calif
    Posts
    1,450
    +1
    9
    http://www.google.com/products?hl=en...ed=0CDIQrQQwAA



    Edit: ....nevermind....you need "connectors"!

  5. #5
    Crash Test Dummy Smitty's Avatar
    Join Date
    Jun 2006
    Location
    Cullman, AL
    Posts
    1,280
    +1
    2
    Quote Originally Posted by ercBOOSTED View Post
    I should have specified that I don't want plastic. Sorry about that. I spent lots of time on google to no avail. I found the same one that you posted.
    Oh, NOW you tell me.

    I'm like you; if I needed one, I'd go nuts trying to find an aluminum one. Unfortunately, there doesn't seem to be many applications for a through hull fitting that size, unless you are just wanting to spit water out. Might be stuck with the plastic one, my friend.

    Haven't dealt with the 4 strokes much; you will be coming off of a 3/4" fitting on the pump? That's hella big.

  6. #6
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3
    Ya it actually put me in a piss poor mood that I couldn't find one lol. The past two days I have spent multiple hours looking for this. I have a few more people to check with. Thanks for trying!

  7. #7
    Crash Test Dummy Smitty's Avatar
    Join Date
    Jun 2006
    Location
    Cullman, AL
    Posts
    1,280
    +1
    2
    If you want to get carried away, you can get two 3/4" outlets, cut the ends off, and weld them together.

  8. #8

    Join Date
    Oct 2007
    Location
    Brisbane, Australia
    Posts
    1,538
    +1
    3
    Quote Originally Posted by ercBOOSTED View Post
    I'm looking for a 3/4" thru hull fitting so I can connect hose from my pump to the JD intercooler. I have looked everywhere but can't find any. Let me know if you know of any.
    Hi Mr Boosted,
    I don't know the JD i/c at all so this might sound like a dumb question but does it have an infeed line of 3/4" as standard.

    The reason I ask is that I saw a situation of someone feeding a 3/4" infeed line to an intercooler core and it popped the fins. They went back to a 1/2" and all was well.

    Just checking that's all.

  9. #9
    ercBOOSTED's Avatar
    Join Date
    Apr 2007
    Location
    Pittsburgh, Pa
    Posts
    1,093
    +1
    3
    Ya it all depends on how he set it up. Mine does have a 3/4" infeed line on it. I talked to him a bit ago and he said to use the 5/8" thru hull fitting that he gave me. He also said that I could tap the pump with a 3/4" fitting if I wanted but it would be overkill. He said a 5/8" pump fitting would be fine so I guess I'll do as he said.

  10. #10

    Join Date
    Oct 2007
    Location
    Brisbane, Australia
    Posts
    1,538
    +1
    3
    Quote Originally Posted by ercBOOSTED View Post
    Ya it all depends on how he set it up. Mine does have a 3/4" infeed line on it. I talked to him a bit ago and he said to use the 5/8" thru hull fitting that he gave me. He also said that I could tap the pump with a 3/4" fitting if I wanted but it would be overkill. He said a 5/8" pump fitting would be fine so I guess I'll do as he said.
    Sounds good. I doubt it would effect JD's unit but then again. Hate to see the extra pressure pop the fins and fill the motor with water and rust the inside while sitting in the shed during winter.
    The 5/8" would act as a restrictor between the others.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Genesis 4 person capacity decal, where to get the hull sticker?
    By iqrturbo in forum Polaris Open Discussion
    Replies: 26
    Last Post: 08-12-2013, 07:22 AM
  2. How to Tap Pump and Do Thru Hull Fitting
    By ercBOOSTED in forum Yamaha PWC Performance (4-stroke)
    Replies: 8
    Last Post: 08-05-2010, 08:45 PM
  3. Anyone know where to get a S3 hull?
    By Water4fire in forum 4-Tec Performance
    Replies: 10
    Last Post: 05-14-2010, 07:54 AM
  4. Need to find a Red bilge thru hull fitting.
    By Dockside in forum Open Discussion
    Replies: 4
    Last Post: 12-06-2009, 12:31 PM
  5. where to get through hull exhaust fitting
    By BoostedH23a1 in forum 4-Tec Performance
    Replies: 23
    Last Post: 05-07-2007, 04:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •