Thread: My project gpr1300.
08-09-2010, 08:07 PM #1
My project gpr1300.
I have a 2001 white hull with a 1300r non power valve motor. I got like a stage I kit and i am running 73.1 on gps. My mod's that i have done to it:
1- Riva ride plate(no work done to it stock).
2- R&d800 intake grate
3- stepped sponsor for best handling.
4- solas 14/20
5- riva efi tuned
7- free flow exhaust( by what i read i lossing rpm)
8- 3 deggre keyway
9- and my throttle body wide open for more air flow
My next goal mod that i want to do:
1- I allready ordering the leo's wedge pump talk to him today very nice guy.
2- I need to buy my pet tiny tach as soon as possible dont know my rpm.
3- I want to install the jetworks too.
I am now hitting 73.1 my next goal is touch the 75.0 mph without touching the motor. i want to leave the stock compression for now. This testing was done, doing the superman.
08-10-2010, 02:48 PM #2
Sounds crazy but take a look at the bottom of your hull for scratches and knicks - it will slow you down - also make sure your pump is nice and clean/smooth for optimum performance.
08-10-2010, 06:03 PM #3
yeah that true men cause i allready did the bottom hull. I was doing 72.3 and when i did the bottom i did 73.1.
08-10-2010, 08:32 PM #4
- Join Date
- Jan 2010
Shouldn't that be a powervalve motor? I've never heard of a non powervalve gp1300r
08-10-2010, 08:41 PM #5
08-10-2010, 09:26 PM #6
thank beerdart yeah 05 and up are no pv. now i am waiting on leo wedge pump to see if i could get to do the 75 with allmost stock motor only mod in the motor is the efi and removed the air box to more air flow and 3 d keyway.
08-11-2010, 08:49 PM #7
today i bought the pet 2100 i want to see my rpms. I went to riva racing, damn is a expensive tool it cost me $265. So my question is how is the easy way to install this if any body got pic please post some to see it.
08-16-2010, 07:59 PM #8
this sunday i went to the water and i connect the tiny tach but i could see my rpms at full throtle cause i dont know how i could see the max rpms that stay recorded on pet-2100 like my gps garming do, please i need help in this
08-21-2010, 05:39 PM #9
hey did you have to mod anything to get the motor to work or direct bolt in? I just blew up my 03' 1300 and am thing of goin non pv.
08-22-2010, 07:47 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jbmayers in forum Yamaha PWC Performance (2-stroke)Replies: 15Last Post: 06-16-2008, 04:57 PM
By jbmayers in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 04-03-2008, 07:52 PM
By licksipsuck in forum Yamaha PWC Performance (2-stroke)Replies: 16Last Post: 02-25-2007, 09:01 PM
By andygpr748 in forum Yamaha PWC Performance (2-stroke)Replies: 10Last Post: 01-09-2007, 08:16 AM
By elebouef in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 12-17-2005, 02:30 PM