Results 1 to 5 of 5
  1. #1
    Need more surf... SAVAGEXP's Avatar
    Join Date
    Sep 2007

    Accu Bend Impeller Pitch Tool W/ 6 Gauges & Holding Jig

    I paid a ton for this. Hope it can go to a good home.

    1) Accu Bend Impeller Pitch tool (Used)

    1) Accu Bend Impeller Holding Jig (Used)

    4) Accu Bend Pitch Gauges (Used)

    138mm - 142mm 8 to 14 degrees

    138mm - 142mm 15 to 25 degrees

    144mm - 148mm 8 to 14 degrees

    144mm - 148mm 15 to 25 degrees

    2) Watcon Pitch Gauges (Brand New)

    155mm - 160mm 8 to 14 degrees

    155mm - 160mm 15 to 25 degrees

  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    near Toronto, Canada
    What diameter impellers do the gauges fit?

  3. #3
    is thinking. grantuk's Avatar
    Join Date
    Sep 2006
    Surrey, UK
    Obviously this thread is years old but I am trying to find an 'Accu Bend Impeller Holding Jig' as described above.

    Doe anyone have a picture of one or know where I can find one?

    Google doesn't return anything.


  4. #4

  5. #5
    is thinking. grantuk's Avatar
    Join Date
    Sep 2006
    Surrey, UK
    Thanks but I don't think that is what the 'Accu Bend Impeller Holding Jig' is.

    I am after a jig that will hold the impeller whilst I measure the pitch and then adjust accordingly.

    A lathe works perfectly for this and you have a secure fixing and 90 degree blocks to measure pitch against.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Prop gauges is a good tool to have!
    By 2fast4u in forum Yamaha Open Discussion
    Replies: 8
    Last Post: 10-17-2007, 10:58 AM
  2. Custom Shaft Holding Tool
    By 1FastTrespiper in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 05-09-2007, 08:30 PM
  3. Engine-Pump alignment tool & crank jig
    By gvnitup in forum Polaris How To & FAQs
    Replies: 11
    Last Post: 04-30-2007, 07:51 PM
  4. need Part # for RXP driveshaft holding tool
    By rapidacceleration in forum 4-Tec Performance
    Replies: 3
    Last Post: 04-25-2007, 09:55 PM
  5. having trouble pitching wont bend!
    By TorquePhoto in forum 4-Tec Performance
    Replies: 6
    Last Post: 08-12-2006, 09:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts