08-16-2010, 12:56 PM #1
Tired of stripping those Phillips heads?
08-16-2010, 02:40 PM #2
Could you post the screw sizes? Maybe part numbers?
I've had to use an impact and sometimes an easy-out on mine.
08-16-2010, 03:14 PM #3
I bought them by thread size which is simple to determine, just put a vernier caliper across the thread to see how many MM it is, and the pitch is standard. I have not come across any fine pitch screw in my ski yet.
As far as head type, screws in diaphragm cover are Socket Button Head and ones in jet cover are Socket Flat Head. I think their thread sizes are M3x.5 and M2x.4.
If you're not familiar with thread specs, best way is take the screw out to a hardware store and compare them.
08-17-2010, 02:32 PM #4
- Join Date
- Aug 2006
- Pittsfield, MA
Wish I saw this last week.
08-21-2010, 01:22 AM #5
- Join Date
- Aug 2009
- Beaumont, Texas
do you have the part numbers?
I need some info on this.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By gorilla03 in forum Polaris Open DiscussionReplies: 20Last Post: 01-15-2008, 07:08 AM
By bnovak in forum Yamaha Open DiscussionReplies: 2Last Post: 09-14-2007, 01:14 PM
By antoniodef in forum Polaris Open DiscussionReplies: 2Last Post: 05-10-2007, 04:20 PM
By slow1300 in forum Yamaha Open DiscussionReplies: 4Last Post: 05-02-2007, 08:23 PM
By RX951 in forum Yamaha Open DiscussionReplies: 7Last Post: 08-02-2006, 07:53 AM