Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
  1. #1
    FullTilt429's Avatar
    Join Date
    Jul 2010
    Location
    Pleasanton, CA USA
    Posts
    332
    +1
    6

    McMaster-Carr 4-Tec Parts List

    I was thinking back to the day when I rode Standups and frequented X-H20.com (GH's sister site). Over there we had a huge list of all of Mc/Carrs parts catagorized by application for a superjet.

    I did a quick search over hear and couldnt find anything for a 4 tec parts list, and just thought a list like this would be very beneficial to someone looking for that lower cost part or hard to find piece, or a quick one stop ordering spot for a DIY mod. Copy and Paste or Post 'em up and Ill add them to the list. http://www.mcmaster.com

    Please Keep DIY Kits labeled and together.

    This is a Work in Progress

    Bolts:

    -------------------------------------------------------------

    Chemicals:

    Permatex Right Stuff, 7.5 oz. Aerosol can: 66175A41
    3M 5200, black, 3oz tube: 67015A41
    3M 5200, black, 10 oz cartridge: 67015A51
    3M 5200, white, fast cure, 3oz tube: 67015A42
    3M 5200, white, fast cure, 10 oz cartridge: 67015A44
    JB Weld, standard: 7605A11
    JB Weld, quick cure: 7605A13
    Loctite 242, blue: 91458A14
    Loctite 271, red: 91458A160
    Loctite 572, large size only: 1810A25
    Loctite 790 Gasket Remover: 7484A25
    Marine Grade Grease, cartridge: 10175K15
    Permatex Silicone Gasket, ultra-blue, tube: 7600A21
    Permatex Silicone Gasket, ultra-blue, cartridge: 7600A22
    Pipe Thread Sealant: 5477K12
    Silicone Sealant, tube: 7587A37
    Silicone Sealant, cartridge: 7587A33

    -------------------------------------------------------------

    Engine/ SC/ Pump:

    Supercharger Spring Washers: 96475K278

    4" Air Intake Kit

    4" Kanaflex Tube: 56345K24
    4" Wired Tube Hose Clamps: 45955K72
    4" PVC Coupler: 4880K78
    Get Air Filter and s/c Adapter from online store.

    Catch Can
    1.5" x 1 x 1.5 PVC Tee: 4880K977 (IMO I felt the 2" pipe was too big)
    1.5" Bushing Reduced to 1/2 NPT, 2 req. : 4880K207
    1" Bushing Reduced to 1/2 NPT: 4880K202
    1/2 NPT to 1/2 Tube, brass, pack of 5 (you only need 1): 5346K25
    1/2 NPT to 5/8 Tube, brass, pack of 5 (you only need 1): 5346K66
    1/2 NPT Drain Valve: 4921K35
    Breather get at Auto Parts Store.


    -------------------------------------------------------------

    Electrical:

    -------------------------------------------------------------

    Hull:

    Strainer Kit:
    Inline Water strainer 1" Clear Bowl: 9875K218
    1" NPT x 3/4" Straight Tube Fitting, pack of 10: 5372K136
    1" NPT x 3/4" Elbow Tube Fitting, pack of 10: 5372K485
    w/ Shut off valve: 9848K41

    -------------------------------------------------------------

    Misc:

    Beer Bong, 64 oz, w/ 3/4” line: 4383T6 / 5233K71 (my fav)
    Last edited by FullTilt429; 08-18-2010 at 12:59 AM.


  2. #2
    FullTilt429's Avatar
    Join Date
    Jul 2010
    Location
    Pleasanton, CA USA
    Posts
    332
    +1
    6
    Hmm... I guess noone likes this idea... Just thought it would be handy to list all the mcmaster parts we would use on a 4tec for a quick reference place. If nothing else can someone give me the part number for the mcmaster s/c washers?

  3. #3
    Work Harder, Millions on Wellfare Depend On Us! ultramaxracing05's Avatar
    Join Date
    Aug 2009
    Location
    Beaumont, Texas
    Posts
    2,999
    +1
    123
    they only carry the spring washers.
    as far I know no clutch washers
    great info tho, I bet many ppl looked at this and took note.

  4. #4
    FullTilt429's Avatar
    Join Date
    Jul 2010
    Location
    Pleasanton, CA USA
    Posts
    332
    +1
    6
    The spring washers are the ones I was trying to find the part number on, That would be awesome if they carried a reliable clutch washer.

  5. #5
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by FullTilt429 View Post
    The spring washers are the ones I was trying to find the part number on
    This is a great thread... should be a "sticky"! Thanks for taking the time to put this together

    Here's a link for the stainless SC clutch washers... http://www.mcmaster.com/#96475k278/=39q2kh

    I need one of them beer bongs

  6. #6
    RXPSTUNNA's Avatar
    Join Date
    Jul 2010
    Location
    chicago il
    Posts
    282
    +1
    2
    good post ill be using it does loctite gasket remover eat at 3m 5200 and aid in removal?

  7. #7
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by RXPSTUNNA View Post
    good post ill be using it does loctite gasket remover eat at 3m 5200 and aid in removal?
    I don't think anything eats at that stuff... when it's fully cured

  8. #8
    FullTilt429's Avatar
    Join Date
    Jul 2010
    Location
    Pleasanton, CA USA
    Posts
    332
    +1
    6
    Thanks Big Daddy, I added it.

    RXPStunna, Im not sure about that... 5200 is some tough sh*t.

    Everyone else feel free to add to this... just post the part, section, and part no. and ill add it to the list. I dont know enough about these yet to know what parts to even looks for, but the list we had for the superjets was huge, and Id like to see this get larger.

  9. #9
    Work Harder, Millions on Wellfare Depend On Us! ultramaxracing05's Avatar
    Join Date
    Aug 2009
    Location
    Beaumont, Texas
    Posts
    2,999
    +1
    123
    Quote Originally Posted by FullTilt429 View Post
    The spring washers are the ones I was trying to find the part number on, That would be awesome if they carried a reliable clutch washer.
    yeah it will save ppl lots of money, its outrageous what the clutch washers are priced at!
    100 dollars for 2 washers!!!

  10. #10
    R88ory RXP's Avatar
    Join Date
    Feb 2008
    Location
    Kent, England
    Posts
    2,737
    +1
    46
    Quote Originally Posted by ultramaxracing05 View Post
    yeah it will save ppl lots of money, its outrageous what the clutch washers are priced at!
    100 dollars for 2 washers!!!
    They dont sell the actual washers for the clutch only the spring washers that provide the tension in the clutch, they are a vast improvement over the stock washers.

    R88

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mcmaster Carr part number for Ada 951 dome o rings
    By goose in forum 2-Stroke Performance
    Replies: 7
    Last Post: 01-08-2012, 07:09 PM
  2. 2005 PUMP CONVERSION PARTS LIST.
    By RX951 in forum Yamaha How To & FAQs
    Replies: 25
    Last Post: 05-01-2007, 09:10 PM
  3. Parts list for RXT pump conversion for GTX?
    By 01xdime in forum 4-Tec Performance
    Replies: 2
    Last Post: 11-19-2005, 09:11 AM
  4. Tilt steering conversion parts list.
    By Green Hulk in forum 4-Tec Performance
    Replies: 20
    Last Post: 09-10-2005, 06:15 PM
  5. RR parts list/prices...
    By rx4pain in forum 4-Tec Performance
    Replies: 10
    Last Post: 05-23-2005, 08:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •