08-17-2010, 01:05 PM #1
XS Power /Type 3 / Fizzle I/C with bracket $120
Older XS Power I/C and bracket to attach to the pump shoe I will send some pads I used to help stop rubbing on the bottom of the hull. The intercooler does not leak and is good and clean. There are some cratches on it from installing and the bottom has a pad I put on it so it didnt bang against the hull. There is a small dent on it but it doesnt hurt anything. I simply went with a different set up since I am going with a through hull exhaust on my set up. Will include the water fittings (90 degree and straight).
$120 shipped in the US.
To use this you will need
2 3" to 2.5 " Couplers
1 2.5" 45 coupler
1 2.5 " Straight coupler
T-Bolt Clamps and 2 pieces of 18" 45 degree pipe that you will need to cut.
08-19-2010, 09:45 AM #2
08-23-2010, 10:39 PM #3
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By hydrojunkie in forum Videos & PicturesReplies: 6Last Post: 03-31-2008, 12:53 AM
By stewartgpr in forum Yamaha How To & FAQsReplies: 2Last Post: 10-02-2007, 02:53 AM
By MikeTrin in forum Open DiscussionReplies: 4Last Post: 06-29-2006, 05:10 PM
By chuck in forum Videos & PicturesReplies: 4Last Post: 03-16-2006, 05:47 PM
By sponge racing in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 12-25-2005, 03:35 AM