Results 1 to 5 of 5
  1. #1
    ktyamaha36's Avatar
    Join Date
    Sep 2009
    Location
    Winter Haven,FL
    Posts
    303

    Virage TX 1200 Pop off and Mixture settings?

    I have a 01 polaris virage tx 1200 That runs great but if you let it idle for more than 10 seconds it dies and will not restart unless you choke the hell out of it and quickly push it back in once it fires. The carbs have been "rebuilt" by joe blow and im guessing the pop off was not set right. Anyone know off the top of their head what the specs for these carbs should be? I would try and find a manual but I have the carbs tore off it right this moment and would like to try and get them back on this evening! Thanks for the help in advance!


  2. #2
    ktyamaha36's Avatar
    Join Date
    Sep 2009
    Location
    Winter Haven,FL
    Posts
    303
    18 views and not one person could shoot me some base numbers off the top of their head or have a manual for a polaris 1200??

    Man, You Polaris boys sure know your stuff! Thanks for the help!

  3. #3
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,777
    +1
    405
    chill dawg.have you looked thru the tech section???did you replace the grey fuel lines??sync the carbs? low speed adj is 1 1/8 i believe pop-off is around 20 as well.i don't keep my manual in my back pocket but can post it later.

  4. #4
    Rasta Mon Condoms We Be Jammin!!!!! TxVirageTx's Avatar
    Join Date
    Aug 2006
    Posts
    5,777
    +1
    405
    pop off is 10-18 psi and the info is in the tech section,get with a moderator for a new library card

  5. #5
    ktyamaha36's Avatar
    Join Date
    Sep 2009
    Location
    Winter Haven,FL
    Posts
    303
    Thank you sir! You da man!

    Yes all fuel lines have been replaced. Carbs are sync'd / new disphrams etc. I picked this up from a guy who got fed up with it after he rebuilt them. It will rev ok on the trailer but drop it in the water and it falls on its face as soon as you touch the throttle.

    I was in a hurry to get it back together last night so I didnt check pop off OR check the accelerator pump. I did check the lows and they were at 1 1/2. I will pull them again tonight and check it out and report back! Thanks again!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. pop off/thermostat 2000 polaris virage tx 1200 question
    By timbo2 in forum Polaris Tech Tips and Info
    Replies: 5
    Last Post: 08-06-2016, 07:46 AM
  2. Wtb 2000 virage tx 1200 ignition coil and wiring harness.
    By wardog in forum Polaris PWC Performance
    Replies: 0
    Last Post: 07-20-2016, 12:31 AM
  3. Virage TX Carb Pop off numbers
    By barto in forum Polaris Open Discussion
    Replies: 5
    Last Post: 06-08-2016, 07:33 PM
  4. Pop off and adjustment setting 2001 XL 800
    By jayball in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 06-05-2013, 08:18 PM
  5. 2002 virage 700's and Virage TX 1200 For Sale
    By thomslik in forum Polaris Skis
    Replies: 1
    Last Post: 04-25-2009, 09:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •