Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 33
  1. #1

    BROKEN VALVE.. Parts?????

    I have a 2006 RXP with 49hrs. Has a broken exhaust valve on the middle cylinder.
    I can have the head fixed at a local shop.

    Are there any aftermarket parts that are ok to use? I find the $500 gasket kit quite expensive??

    Bottom end is clean.
    Can someone recomend what I should replace??

    THanks!


  2. #2
    You will need new rocker arm shaft bolts as they are torque to yield, not sure on the head bolts. Then get a headgasket from seadoo fo less then $100, 12 valvestem seals are around $75. While the head is off you might want to consider changing all the exhaust valves with the 07+ updated version to prevent this from happening again!

  3. #3
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    The updated valves were in the 06's

    You will need new head bolts, as they are stretch bolts just like the rocker shaft bolts. You don't need the $500 gasket set... just buy the one's that you need individually.

  4. #4
    [QUOTE=BigDaddyRXP;1528631]The updated valves were in the 06's

    Some of the 06's have updated solid valves.

  5. #5
    The broken one seems to have a hollow shaft.

    Where can I get the 12 valvestem seals ?
    Would you change the Valve Guides???

    Oh .. and does anyoine know the part # for the head gasket?

  6. #6
    2006 Turbo RXP boBO's Avatar
    Join Date
    Mar 2008
    Location
    STATE OF KUWAIT
    Posts
    1,034

  7. #7
    Thanks!
    Now to find everything else at a good price!

  8. #8
    WHat is everyones thoughts on the bottom end? New piston only? Piston and Rod? Should I chage any of the bearings on the rod?

  9. #9
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    If you dropped a valve in that cylinder... definitely replace the rod, piston, and all bearings associated with that cylinder.

    How bad was the damage anyway... any pics???

  10. #10
    SingTH's Avatar
    Join Date
    Jun 2010
    Location
    Thailand
    Posts
    476
    +1
    9
    Must be add PTO gasket from http://www.4-tecperformance.com and check the cylinder wall has a scratch or not?

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Broken Valve
    By douglasb76 in forum 4-Tec Performance
    Replies: 37
    Last Post: 10-03-2008, 09:09 AM
  2. Broken Valve
    By douglasb76 in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 10-01-2008, 07:05 AM
  3. 758 Pro Gas Exhaust valve parts
    By Watcon in forum Polaris Classifieds
    Replies: 13
    Last Post: 06-26-2008, 11:27 AM
  4. Gas Valve part numbers
    By OsideBill in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 04-14-2008, 11:58 AM
  5. Please Help!! Broken valves...
    By Ramps in forum Yamaha PWC Performance (2-stroke)
    Replies: 17
    Last Post: 04-13-2008, 01:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •