Kawasaki Ultra 250X 2007 Error Code F1

[docas]

I have got this error after repariring my jetski.
it runs. but on the dash board showing error F1.
Whats does it mean?
How to find out whats the prob without spec. service (nobody has this in Lithuania)

Thanks.

[nicjak]

if you have been repairing your ski it would be handy to know what you repaired, or would you like us all to guess? check all your electrical connections if you had them apart.

[sirbreaksalot]

I have got this error after repariring my jetski.
it runs. but on the dash board showing error F1.
Whats does it mean?
How to find out whats the prob without spec. service (nobody has this in Lithuania)

Thanks.

"The LCD in the meter unit displays service code character [A] to show the problem(s) which the DFI system and ignition system has at the moment of diagnosis. •To enter the dealer mode push the “SET” button [B] with “MODE” button [C] for 3 seconds or more. •Read the service code character in the LCD display. Refer to the “Service Code (Character) Table” in the following section. •To return the user mode push either “SET” or “MODE” button for one second or more. •The service code character(s) will not be shown on the LCD in the meter unit after the problems are solved"
Waz