Thread: 2005 RXP - BOV Setup??
08-26-2010, 05:22 AM #1
- Join Date
- Apr 2010
2005 RXP - BOV Setup??
Got a 2005 RXP, got the X Charger and bigger wheel running 12 lbs, bigger intercooler, thru hull exhaust, 15/20 solas, riva intake grate, am getting the x injectors put in next week along with 4 inch flexi air kit with K&N filter, wondering what BOV set ups you guys run? Do abit of wave jumping but in and out of swell all the time so engaging and disengaging all day so want a bit of security, will a BOV work? What do you guys use and or recommend?
08-26-2010, 06:12 AM #2
You can buy from here, PWC performance
Blow-off Valve Kit, HKS SSQV III for SD 255,215
08-31-2010, 12:05 AM #3
I'm running the X with an HKS - but IMO checking the slip every 10 to 15 hours especially in your conditions is mandatory.
08-31-2010, 12:51 AM #4
With your setup. You need to be running first is a Rising fuel pressure regulator(rrfpr) and some 42 lb injectors. Do not run a external intercooler with a x charger and 4 inch air with out these or you will go BOOM! It will run to lean. Then to top it off you have a upgraded wheel! Please do these two then get a bov if you like. good luck.
08-31-2010, 07:35 PM #5
08-31-2010, 07:59 PM #6
you want it as close to the tb as possible...
i just sold this set up....and am going bigger with the intercooler...but this worked well
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By olson_joseph in forum 4-Tec PerformanceReplies: 13Last Post: 02-21-2008, 01:12 PM
By cjg#217 in forum 4-Tec PerformanceReplies: 1Last Post: 05-13-2007, 11:22 AM
By RXP-REX in forum Sea Doo Open DiscussionReplies: 24Last Post: 03-02-2007, 10:05 PM
By rapidacceleration in forum 4-Tec PerformanceReplies: 2Last Post: 08-12-2006, 08:55 AM
By mrracing in forum 4-Tec PerformanceReplies: 16Last Post: 12-06-2005, 06:14 PM