Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 41
  1. #1
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11

    1512cc MONSTER STROKER MOTOR ""SOLD""" !!!!!!

    Well im off to another project. Selling the entire engine, wont part out because the cases have been clearenced/ported for the 3mm stroker crank. The R&D heads have been cut for the stroke etc.... This engine was in my 06' Stealth ski, running on EFI.
    Motor has 13 hours is all ! TONS of money went into this engine and its very strong.

    3mm stroker crank $1300.00
    cylinder work alone $1700.00
    89mm piston kits $750.00
    R&D heads + milling $550.00
    case porting/cleanence $250.00
    core cylinders $150.00
    cases $350.00
    all gaskets $250.00
    Riva gas valves $600.00

    About $6000.00 to build this Monster. There is more money in it but this is the majority of it.

    Does not include TB's, reeds.

    $3600.00 and I will split the shipping at my cost in the USA. This motor is just broke in !

    Here is a link to the build thread.. http://www.greenhulk.net/forums/show...ild-THE-VIDEO-!!!!!!!!!
    Last edited by WATER WOODY; 08-29-2010 at 07:27 PM.


  2. #2
    fenn's Avatar
    Join Date
    Jan 2007
    Location
    Exit 98, New Jersey
    Posts
    926
    +1
    1
    Quote Originally Posted by WATER WOODY View Post
    Well im off to another project. Selling the entire engine, wont part out because the cases have been clearenced/ported for the 3mm stroker crank. The R&D heads have been cut for the stroke etc.... This engine was in my 06' Stealth ski, running on EFI.
    Motor has 13 hours is all ! TONS of money went into this engine and its very strong.

    3mm stroker crank $1300.00
    cylinder work alone $1700.00
    89mm piston kits $750.00
    R&D heads + milling $550.00
    case porting/cleanence $250.00
    core cylinders $150.00
    cases $350.00
    all gaskets $250.00
    Riva gas valves $600.00

    About $6000.00 to build this Monster. There is more money in it but this is the majority of it.

    Does not include TB's, reeds.

    $3600.00 and I will split the shipping at my cost in the USA. This motor is just broke in !
    Sad to see you sell this, that build thread was a good one


    Sent from my iPhone using Tapatalk
    Last edited by WATER WOODY; 08-28-2010 at 03:54 PM.

  3. #3
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    Quote Originally Posted by fenn View Post
    Sad to see you sell this, that build thread was a good one


    Sent from my iPhone using Tapatalk

    Thanks Fenn.....my goal was to make a big stroker on EFI run. Then i went nuts and put triples on it. Time for a new project now.

  4. #4
    L Carlson's Avatar
    Join Date
    Aug 2007
    Location
    Bonita Springs, Florida, United States
    Posts
    7,118
    +1
    2
    4 stroke in the works

  5. #5
    Crash Test Dummy Smitty's Avatar
    Join Date
    Jun 2006
    Location
    Cullman, AL
    Posts
    1,280
    +1
    2
    This is the kind of deal I need to find after the New Year for my new project!

  6. #6
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    Quote Originally Posted by Smitty View Post
    This is the kind of deal I need to find after the New Year for my new project!
    Ill box it up for ya Smitty.

  7. #7
    Crash Test Dummy Smitty's Avatar
    Join Date
    Jun 2006
    Location
    Cullman, AL
    Posts
    1,280
    +1
    2
    Ugh.... if I had the money now, I'd have you put a bow on it!

  8. #8

    Join Date
    Aug 2005
    Location
    Reno,Nevada
    Posts
    180
    Quote Originally Posted by WATER WOODY View Post
    Well im off to another project. Selling the entire engine, wont part out because the cases have been clearenced/ported for the 3mm stroker crank. The R&D heads have been cut for the stroke etc.... This engine was in my 06' Stealth ski, running on EFI.
    Motor has 13 hours is all ! TONS of money went into this engine and its very strong.

    3mm stroker crank $1300.00
    cylinder work alone $1700.00
    89mm piston kits $750.00
    R&D heads + milling $550.00
    case porting/cleanence $250.00
    core cylinders $150.00
    cases $350.00
    all gaskets $250.00

    About $5500.00 to build this Monster. There is more money in it but this is the majority of it.

    Does not include TB's, reeds.

    $3600.00 and I will split the shipping at my cost in the USA. This motor is just broke in !

    Here is a link to the build thread.. http://www.greenhulk.net/forums/show...ild-THE-VIDEO-!!!!!!!!!
    I knew it! so your done for the year? bad weather tommarrow and sunday.....

  9. #9
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    Quote Originally Posted by faster1200 View Post
    I knew it! so your done for the year? bad weather tommarrow and sunday.....
    Not done Dan. Next project coming soon. I could put a rocket engine on that ski and it still would not be fast enough for me.. This stroker motor was a personal challenge for me as you know. Made it run on a stock pipe and triples! Now its time for the next Monster...

  10. #10
    Crash Test Dummy Smitty's Avatar
    Join Date
    Jun 2006
    Location
    Cullman, AL
    Posts
    1,280
    +1
    2
    That's what's wrong with you people, you make me want to buy things I don't need! I've already got one ski with 90mm pistons, do I need another like it?

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE 785 Stroker Motor 1050 and MOTO MARINE PIPES
    By 785 lugs in forum Polaris Classifieds
    Replies: 27
    Last Post: 06-24-2009, 02:41 PM
  2. Trade- My newly rebuilt 1200pv motor for Yamaha 701 stroker motor
    By blasterboy1980 in forum Yamaha Classifieds
    Replies: 4
    Last Post: 10-20-2008, 09:04 PM
  3. F/S GP1200 6mm stroker motor with FP Triple pipes
    By philip_gpr in forum Yamaha Old School Skis
    Replies: 9
    Last Post: 09-23-2008, 03:02 PM
  4. Sea Doo Stroker Motor for '09???
    By Rip'nTear SHO in forum 4-Tec Performance
    Replies: 40
    Last Post: 08-07-2008, 10:28 PM
  5. stroker motor
    By MONKEY in forum 4-Tec Performance
    Replies: 21
    Last Post: 10-20-2007, 09:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •