Results 1 to 6 of 6
  1. #1

    Gas pouring into pto carb...

    I got my 95 sl750 running, but it runs really bad, and I can see gas pouring into the pto cylinder carb at a rate similar to pretty much the entire flow of the fuel pump. Im assuming that i will need to rebuild the carbs, but what in the carb do you guys think is causing this. My only small carb experience is TK motorcycle carbs....


  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,584
    +1
    1,272
    Pull the carbs off, and during the rebuild you will find out what was causing the problem

    Rebuild ALL the carbs, not just the one you are seeing a problem with.

  3. #3

    Post

    Lol, good point

    As long as theres nothing odd about those carbs compared to anything else i should be good then. thanks for the help.

  4. #4
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,329
    +1
    30
    If that is true, you have a needle and seat issue.

    Like K447 mentioned, all the carbs need to be gone through.

    Do 1 at a time so you can referenece a complete carb should you forget.

  5. #5
    yup, retainer screw for the needle pivot bar worked its way loose somehow, cleaned all the gunk out of all three and checked the diaphragms.... now it runs good for the first time in 3 years!

  6. #6
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,329
    +1
    30
    Great, but did you inspect the filters located inside the carbs?

    If you had gunk inside, you MUST look into that.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Won't start unless fuel poured into carb !
    By jdwcs in forum Yamaha How To & FAQs
    Replies: 3
    Last Post: 06-13-2010, 11:31 AM
  2. Replies: 40
    Last Post: 01-01-2010, 12:50 AM
  3. Carb Rebuild Q (photos) - PTO Carb (787)
    By fire in forum 2-Stroke Performance
    Replies: 7
    Last Post: 10-31-2009, 02:22 PM
  4. Gas Puring into Bilge From Aft Carb '98 GTX
    By msd58 in forum 2-Stroke Performance
    Replies: 5
    Last Post: 07-06-2009, 03:41 PM
  5. gas pouring out the exhaust
    By stxrinNLA in forum Kawasaki Open Discussion
    Replies: 4
    Last Post: 07-30-2008, 10:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •