08-28-2010, 10:04 PM #1
Perfect Keihin 38mm setup for Kawasaki 650 SX or X2
You are bidding on a Keihin 38mm carb set up, complete from intake, carb, and stock flame arrestor and water cover. I took it apart to show the excellent condition it is in. This is a promised bolt and go. It came off my 89 Kawasaki X2, the only reason I'm selling this is because I upgraded to a 44mm Mikuni setup.
I also went through and took the jets out and blew the passages and filters out to ensure a great clean carb.
This is a HUGE improvement on older 650 skis that have the 28mm carb. Everything in this carb looks brand new, the diaphrams have no holes and the inside of the carb shows no pitting from junk fuel or water.
The only two things to note about this perfect carb is I've blocked the oil injection (I've had too many fail) and I've taken the choke butterfly out. There is a fitting embedded in the flame arrestor that you can run a primer setup to dump straight down the carb throat. (Worked GREAT).
Bottom line, this is a almost new carb. As I said I took it apart, washed it and cleaned everything to get you on the water. Bolt and enjoy!
And I'm throwing in some aftermarket fiberglass reeds, I upgraded to Boyseen Dual stage, I don't know the make of these, but they are in great shape!
08-30-2010, 09:04 PM #2
I'll bump myself once more and I'll be good.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By rmack_4 in forum Kawasaki PWC Performance (2-stroke)Replies: 2Last Post: 06-26-2008, 08:57 PM
By Bala in forum Kawasaki ClassifiedsReplies: 7Last Post: 06-16-2008, 04:15 PM
By ces01 in forum Kawasaki Open DiscussionReplies: 0Last Post: 02-10-2008, 01:15 PM
By canadan in forum Kawasaki Open DiscussionReplies: 0Last Post: 09-10-2007, 01:36 PM
By rxpblast in forum Kawasaki PWC Performance (2-stroke)Replies: 1Last Post: 12-22-2006, 10:35 PM