10-21-2006, 10:43 AM #1
Performance Problems exhaust beep
I am having the warning exhaust beep temp light come on. I have the riva stage 2 without the water intake and prop....
How can i fix this problem?
10-21-2006, 11:17 AM #2
- Join Date
- Aug 2005
- Jerry's guest bedroom
Need more info. What are you doing when it happens? Idling? WOT? Tearing up the water? What rpm's are you turning when it happens?
10-21-2006, 11:18 AM #3
More than likely the water passages in your intercooler are clogged.
By the way, your performance is hurting tremendously by not using the Riva grate and 15/20 impeller.
10-22-2006, 02:19 PM #4
Soon as get into the water about 2 minutes it start to beep and the exhaust temp light comes on. I dont know where to start looking as why this is happenning...
I am getting the 15/20 Riva prop this week.
10-22-2006, 05:22 PM #5
you mess with your exhaust J pipe lately? (remove it)
If you you probably didnt push it in the coupler far enough and clamped it too low pinching off the water flow into the waterbox.
10-23-2006, 07:26 PM #6
did this problem start after the mods? i have seen the temp (liquid )sensor on the water boxes fail. Normally they will send ground through ECU to MPEM at 213 deg F and initialize "limp mode" at 230 deg F. R u actually overheating?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By firstname.lastname@example.org in forum Polaris Open DiscussionReplies: 6Last Post: 12-16-2012, 09:13 PM
By earthshaker in forum Kawasaki PWC Performance (4-stroke)Replies: 45Last Post: 09-09-2009, 10:35 PM
By DONALDBUCHANAN in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 07-21-2009, 06:59 PM
By mstennes in forum 4-Tec PerformanceReplies: 16Last Post: 07-07-2007, 08:47 AM
By bahamadan in forum Sea Doo Sport BoatsReplies: 4Last Post: 10-25-2006, 10:18 AM