Thread: Pro 785 fuel question
08-30-2010, 04:16 PM #1
- Join Date
- May 2010
Pro 785 fuel question
Ive been working on a pro project and had to remove the fuel tank but the only problem Is I forgot to mark the lines going to the fuel tank.It has 3 lines going to the tank I down loaded a manuel but it doesnt show,the tank all it shows is one going to the water seperator and thats it. Any help?
08-30-2010, 04:48 PM #2
- Join Date
- Oct 2006
- Cleveland OH
Carefully inspect the fuel sender. It will have abbreviations to tell what the fitting is for.
Or remove the sender from the tank and note which one is which.
Lowest hole in sender is main.
The other 2 really don't matter.
1 is the vent and the other is the return.
08-30-2010, 05:40 PM #3
The return has the 2 wires in between it in the picture.
the vent is is short hose with the vent on the end of it. The last is the main. says res. on my tank..
Hope this helps seeing a picture of it.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jabbas in forum Polaris Open DiscussionReplies: 5Last Post: 05-19-2008, 06:56 AM
By joshxp in forum Polaris Open DiscussionReplies: 1Last Post: 08-03-2007, 05:02 PM
By tlk25401 in forum Polaris Open DiscussionReplies: 8Last Post: 03-24-2007, 02:13 PM
By rgard32 in forum Polaris PWC PerformanceReplies: 3Last Post: 12-29-2006, 11:30 AM
By absentx in forum Polaris PWC PerformanceReplies: 8Last Post: 09-05-2006, 04:23 AM