Page 1 of 45 1 2 3 11 ... LastLast
Results 1 to 10 of 442

Thread: breon rxp??

  1. #1
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471

    breon rxp?? now going turbo

    my boat definately is a project..

    i do this for fun and the challenge of it..i dont make a living doing it.. i am to old to be trying to keep up with the 20 somthing guys that race off shore and closed course..i know i am never going to be the fastest ..i dont have the $$ for that..the turbo conversion skis are crazy...who knows...where it will end up but it is fun running with guys who share the passion..i have more things working than i have time ..but it will all come together someday ....so i have nothing to gain by or any reason to hide anything ..so this is what i have done..

    i do 99 % of the work myself ...i make alot of the stuff myself..and just enjoy it...
    not saying everything i do is correct but all part of the r&d and learning process.....with tips from the guys on the forum like rxp6 psycho rxp and duke jp speedskixp bigdaddy ect.. i enjoy sharing ideas with people here pushing the hobby forward.

    so going to start putting all the pics of the stuff on my boat as it has transformed ..here..not really sure where to start but ill get it...

    it has been from stock to s3 charger to x charger now rude 3 ...who know where it will end up...

    i guess ill start with the new hull am shaping...i am hoping to be able to run with conversion skis with it...if the shape works out and does ehat i want it to ..i want to make a mold and a carbon kevlar one that is alot lighter at least that is the plan..


    i started with a rxp hull that hit something and blew out









    Last edited by breon; 06-12-2011 at 04:00 PM.


  2. #2
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    i ported the head lots of time..got a rotax 4224 cam and installed a block guard and riva head studs ..torque them to 90 to 95 ..not 85 the rotax can has the extra material cut out between the lobes












    installing riva valve train this will help...

    http://www.greenhulk.net/forums/show...ces&highlight=
    Last edited by breon; 10-04-2010 at 08:30 PM.

  3. #3
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    my home made block offs..and misc


    my old intercooler set up and heat exchanger..replaced al the plastic fittings.with brass ones this time..






    tapped the manifold and installed th o2 sensor and guages.






  4. #4
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    got a 08 style exhaust..and made this megaphone for the exhaust..and my sort of gutted frankin box..sounds awsome...and i designed a spacer sort of in line with the one already out there with an improvement..but it is just a prototype and needs slight modification so i havent brought it to production..it took some porting to get it to do what i wanted it to it turns the exhaust a little so it doesnt crash into the wall of the horrible exhauset manifold ..it bolts to the head then you bolt your manifold to it ..you may see these again ..but the machien shops kinda stopped the production ..i gave them a cad drawing ...and they wanted stupid money to convert it to g code...and funds arnt flowing right now..








  5. #5
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    a vent i made to get some heat out because the rear air blocks the exit ...i made this rear air ..out of aluminum sheet metal...rear air is'nt the best answer i still pick up 200 rpm buy removing the seat ..got a plan ..just need time...








  6. #6
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    new bigger intercooler i ws getting some fade ..so i fabbed up a new set up....








  7. #7
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    a little powder coating ..










  8. #8
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    new bov...and it sort of installed ...





    Last edited by breon; 09-10-2010 at 12:28 PM.

  9. #9
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    running a riva ecu and rude controler..filled the intake up with a little epoxie..and bolted it together hopefully so it doesnt pop...as well as i filled my end tanks of my new intercooler to reduce volume and keep the throddle response reasonable ..i will make a aluminum intake someday ..one thing at a time...and i made a fuel rail setup with a aeromotive to 1 to1 rrfpr run 50 bosh injectors at this point..have a set ot 60 seamins ..i may go back to...and not use the rrfpr i want a motc ...its only money !






  10. #10
    home of the dislexic fingers breon's Avatar
    Join Date
    Aug 2007
    Location
    port st lucie fl
    Posts
    3,471
    it hasnt been without issues...lost washers blown haead gasket..now # 2 85 ft lbs isnt enough...with the studs...found pieces of the stock water box had busted out..and were rattling around in the box...that isnt good for consitancy....

    ya think???? that could be why the high exhaust tem buzzer was going off last ride if i held it wot..



    have these bilge pumps..need to get them in...for some reason i am letting them kick my azz..kinda avoiding doing it...it is getting there...i guess i just dont have a plan i reallly like yet...





    this one is going to be difficult to get around the intercooler and heat exchanger..



    this is part of a old riva metal washer..that let go...i ended up getting it all found the rest of it in the front oil pump screen after a ride or two....


Page 1 of 45 1 2 3 11 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. breon rxp ?? turbo comes to life..
    By breon in forum 4-Tec Performance
    Replies: 28
    Last Post: 09-04-2011, 10:08 AM
  2. What not to do with your RXP
    By Green Hulk in forum Sea Doo How To & FAQs
    Replies: 60
    Last Post: 01-14-2010, 10:20 PM
  3. RXP MYTHS !!!!!!!!!!!
    By CRAZEDRXP in forum Sea Doo Open Discussion
    Replies: 9
    Last Post: 08-11-2006, 06:16 PM
  4. How bad is you RXP ? ? ? ? ?
    By Jrsrxp in forum Sea Doo Open Discussion
    Replies: 18
    Last Post: 06-07-2005, 07:50 PM
  5. sound improvment (louder) on RXP ?
    By mrracing in forum 4-Tec Performance
    Replies: 23
    Last Post: 05-05-2005, 05:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •